New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy Reaktor Pro 350W 23A Источник питания (100 ~ 240 В переменного тока)

Turnigy Reaktor Pro 350W 23A Источник питания (100 ~ 240 В переменного тока)

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

3 765,01 руб.
Статус:
Есть в наличии
SKU:
9466000005-0
WANT FREE SHIPPING? Click here to find out more!

Серьезное питания для зарядного устройства!

Turnigy Reaktor Pro 350W 23A источник питания был разработан с простотой в виду и обеспечить стабильное, ровное выходное напряжение зарядного устройства (15 ~ 15.5V DC.) Он имеет КПД более 90%.

Pro 350W блок питания Reaktor имеет встроенный вентилятор для эффективного охлаждения и функций по току и защиту от перегрева.

Особенности:
• Защита от перегрузки
• Защита от перегрева
• Защита от короткого замыкания
• До выхода 350W
• Эффективность Лучше, чем 90%
• Встроенный вентилятор охлаждения

Технические характеристики:
Входное напряжение: 100 ~ 240 В переменного тока
Входная частота: 50 ~ 60 Гц
Выходное напряжение: 15 ~ 15.5V DC
Выходной ток: 35A
Выход Вт: 350 Вт
Размеры 185 х 88 х 47мм
Вес: 680г

  • Артикул 9466000005-0
  • Brand Turnigy
  • Емкость ( мАч ) -
  • вес 1240.0000
  • длина 220.00
  • Packaging Width 120.00
  • Высота 160.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I would recommend you to open it and see if the heat sink plate is tightended well, in my caase it wasn't. the capacitor is cheap 85 deg version and not the 105 deg version. I did charge it in max draw, capacitor didnt heat up much. i guess it will hold. will it do so in summers when it is all enclosed ? I dunno, need to wait and watch.

For the price, it is definetely worth it, will it last a lifetime? i doubt it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I would recommend you to open it and see if the heat sink plate is tightended well, in my caase it wasn't. the capacitor is cheap 85 deg version and not the 105 deg version. I did charge it in max draw, capacitor didnt heat up much. i guess it will hold. will it do so in summers when it is all enclosed ? I dunno, need to wait and watch.

For the price, it is definetely worth it, will it last a lifetime? i doubt it

Great power supply. Provides very stable and high current to my reaktor 300w while charging a 6S lipo at 250w. Gets barely warm. High quality aluminium. Very good for the price, highly recommended.

Weighs around 650g by itself.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great power supply. Provides very stable and high current to my reaktor 300w while charging a 6S lipo at 250w. Gets barely warm. High quality aluminium. Very good for the price, highly recommended.

Weighs around 650g by itself.

Use it with my QUATTRO Hobbyking charger. Works great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Use it with my QUATTRO Hobbyking charger. Works great!

totally silent, runs the reactor charger no problem. bright blue LED when its on. came with a US plug kettle cord

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

totally silent, runs the reactor charger no problem. bright blue LED when its on. came with a US plug kettle cord

This is a powerful powersupply and goes well with the 300w reaktor charger.
This charger can draw approx 21A from the source supply. At 12V input, it'll draw approx 250 watts. Given minimum 90pcnt efficiency, it'll charge at over 230 watts with12V source supply. I like it a lot. Make some noise but barely noticeable. Runs warm.
Ideal setup : reaktor 350w powersupply, 300w charger, parallel charging board and you are good to go:)
Dropped a crown because for the price, you can always go for cheap power source (server power source for example) but for the avid and in-a-hurry-to-fly hobbyist, its good!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a powerful powersupply and goes well with the 300w reaktor charger.
This charger can draw approx 21A from the source supply. At 12V input, it'll draw approx 250 watts. Given minimum 90pcnt efficiency, it'll charge at over 230 watts with12V source supply. I like it a lot. Make some noise but barely noticeable. Runs warm.
Ideal setup : reaktor 350w powersupply, 300w charger, parallel charging board and you are good to go:)
Dropped a crown because for the price, you can always go for cheap power source (server power source for example) but for the avid and in-a-hurry-to-fly hobbyist, its good!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking