New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy Servo Сигнал реверса

Turnigy Servo Сигнал реверса

Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!

Turnigy Servo Сигнал реверса можно использовать в линии, чтобы изменить сигнал на сервопривод.

Spec:
Входное напряжение: 3V ~ 12.6V
Тип сигнала: 760us 1520us (Auto Detect)
Тип штепсельной вилки: JR
Длина кабеля: 415mm
Вес: 6gram

  • Артикул SIG-REV
  • Brand Turnigy
  • Емкость ( мАч ) -
  • вес 11.0000
  • длина 60.00
  • Packaging Width 28.00
  • Высота 57.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Have 3 of these units. All 3 glitch the servo when fitted to a gasser. Every time it fires a spark the servo glitches, Lead dressed properly etc.
Rewired the servo for reverse and all fine.. They are fine in a EP plane..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have 3 of these units. All 3 glitch the servo when fitted to a gasser. Every time it fires a spark the servo glitches, Lead dressed properly etc.
Rewired the servo for reverse and all fine.. They are fine in a EP plane..

SIMPLE AND GREAT PRODUCT

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

SIMPLE AND GREAT PRODUCT

Must-have for Bixler 2 etc when using flaps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Must-have for Bixler 2 etc when using flaps.

A must-have if you're running flaps on one RX channel and you can't change the orientation of the servos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A must-have if you're running flaps on one RX channel and you can't change the orientation of the servos

Works flawlessly with HXT900 servo on my Bixler 2 flap. Way easier than fussing with re-soldering the insides of a 9g servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works flawlessly with HXT900 servo on my Bixler 2 flap. Way easier than fussing with re-soldering the insides of a 9g servo.

It is for doing just that. Reversing. And reversing it shal

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is for doing just that. Reversing. And reversing it shal

It reverses the signal, but there is a delay in the control. I tried this on my bixler 2 flaps, the one with the reverser is just a bit too slow for me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It reverses the signal, but there is a delay in the control. I tried this on my bixler 2 flaps, the one with the reverser is just a bit too slow for me.

Works great and easy to use, I am using on my tricopter to reverse a signal and easy to solder shortened male servo leads on to fit, no problems at all and is exactly accurate (KK 2.1 firmware displays input signals) as what they were before. Power is drawn in parallel so no issues with hooking multiple servos up on one revers"er."

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great and easy to use, I am using on my tricopter to reverse a signal and easy to solder shortened male servo leads on to fit, no problems at all and is exactly accurate (KK 2.1 firmware displays input signals) as what they were before. Power is drawn in parallel so no issues with hooking multiple servos up on one revers"er."

This is a must if you need to reverse a servo say for when installing and using wing servos for flaps (which was what my intended use was). Also they come in handy when say your transmitter doesn't have servo reversing switches. Then you can just install one of these reveres to achieve the correct direction of servo throw you may need or want. This servo reverse is fairly small and compact and the extra length of wires it has didn't bother me a bit as some others here previously mentioned. Heck, I'd rather have them longer than shorter since you may never know when that extra wire length may just come in handy. By the way these servo reversers sell elsewhere for 3 to 4 times the price here.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a must if you need to reverse a servo say for when installing and using wing servos for flaps (which was what my intended use was). Also they come in handy when say your transmitter doesn't have servo reversing switches. Then you can just install one of these reveres to achieve the correct direction of servo throw you may need or want. This servo reverse is fairly small and compact and the extra length of wires it has didn't bother me a bit as some others here previously mentioned. Heck, I'd rather have them longer than shorter since you may never know when that extra wire length may just come in handy. By the way these servo reversers sell elsewhere for 3 to 4 times the price here.

very light and small it works perfectly as advertised

you can shorten the cables and user servo terminals (product ID 43715) as required.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very light and small it works perfectly as advertised

you can shorten the cables and user servo terminals (product ID 43715) as required.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking