Turnigy SK3 Fandrive - 3659-1600KV (90mm EDF)

• Overall
• Quality
• Value

Certified Buyer Rated

May 12, 2016

uno de los mejores motores que he comprado, lo estoy ejecutando con 4s lipo, y helice plegable de carbono 10x8, en un hotliner de 2000mm, sube como un cohete, con una temperatura de 40 grados al finalizar el vuelo.

• Overall
• Quality
• Value

Customer Rated

Mar 16, 2016

ran on wemotec evo 11 blade,fresh 6s battery gave 69 amps 1600 watts 2.7kg which dropped to 2.5kg after 1 minute, ran cool amps are over spec but watts below 1680 good light weight setup.would not run it on 7s with a 11 blade would be over spec.

• Overall
• Quality
• Value

Customer Rated

Jan 23, 2015

Bit disappointed. Purchased to use in Hobbyking 12 Blade High-Performance 90mm EDF Ducted Fan Unit. On a flat 6S battery it pulled 78amps at 1531w the motor is only rated to 65amps.
on a 5S 67amps at 1136W.

• Overall
• Quality
• Value

Customer Rated

May 08, 2014

Mounted on a Het 90 fan unit .
Test data using Madthrust unit to test EDF thrust for 64-90mm fans bought at hobbyking.
6S at 23.7v : 1.9 Kg static thrust 56 Amp , 1329 W ,
8S at 33v : 2.8 Kg static thrust , 75amp, 2477 W .
Disappointed as I bought a lander all metal EDF for 6S at hobbyking gave me
2.85 Kg at 6s ,24 v at ,70Amp ,1680 W . :)

• Overall
• Quality
• Value

Customer Rated

Jan 15, 2013

I have two flights on my starmax Alpha jet with this motor. I'm using a flyfly 7 blade 90mm fan and a Redbrick 125 opto esc. I get about 3-3:30 mins of hard flight with a 3300mah 6S batt. This motor seems to make excellent power with is combo...comes down cool and sounds great. Has better than 1:1 ratio of thrust to weight! I'm very happy...good stuff!

• Overall
• Quality
• Value

Customer Rated

Nov 26, 2012

Wow !! Great motor , installed in wemotec 90mm , running 8s with heatsink in an HK L-59 , sounds wonderful .
Pulling around 80 amps
2000 watts
2x4000mah nanotechs 25-50c
Castle ice 100A.

Get One :)