Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

Turnigy SK8 6374-149KV Бесколлекторный мотор с датчиком (14P)

Generating Links

Turnigy SK8 6374-149KV Бесколлекторный мотор с датчиком (14P)

Цена:

Now save сохранить 0,00 A$ 0,00 A$

191,24 A$
Статус:
Нет в наличии!
Артикул:
9192000381-0
Хотите бесплатную доставку? кликните сюда Узнать больше!

Бесколлекторный двигатель Turnigy SK8 6374-149KV с сенсорным датчиком идеально подходит для переоборудования электрических скейтбордов, но может использоваться во многих других областях, где требуется мощный бесщеточный двигатель с датчиком.


Технические характеристики:
КВ: 149
Максимальный ток: 80А
Максимальная мощность: 3500 Вт
Ток холостого хода: 1.3А
Сопротивление: 43 МОм
Вал: 8мм
Вес: 937г
Количество ячеек: 8 ~ 12s LiPo (напряжение)
Расстояние между отверстиями для болтов: 44мм
Резьба болта: M4
Подключение: 4.0 банановый золотой штекер


Вал A: 8мм
Длина со ступицей B без вала: 80.7мм
Диаметр банки C: 61.0мм
Длина банки D: 67.0мм
Общая длина вала E: 126.7мм

  • Kv ( об / об) 149.00
  • Max Токи (A) 80.00
  • Сопротивление ( тк ) 43.00
  • Максимальное напряжение (В ) 45.00
  • Мощность (Вт ) 3500.00
  • Вал А ( мм) 8.00
  • Длина В ( мм ) 80.70
  • Диаметр С ( мм ) 61.00
  • Может Длина D (мм ) 67.00
  • Общая длина E (мм ) 126.70
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

AdventureTime | Проверенный покупатель

  • Overall
  • Quality
  • Value

Love it

Sep 14, 2021

I love these motors on my mbs comp95. Climbs any hill like a candy(well im 70kg hahaha)
Read somewhere comments that they are noisy on big speeds, but so far at 30miles it works like a small east side gang of bees and didn’t experience that big noise that was said. Maybe 30mph still not as fast to hear it.
Overall I’m super happy!!

Lukas | Проверенный покупатель

  • Overall
  • Quality
  • Value

Great motor for reasonable price

Oct 28, 2019

Used it on my E-scooter for quite some time now(over 500km) and can verify that this is real deal. Running at 53A FOC on 12S battery with modded Vesc 4.12. Annoying thing that at higher speeds motor is quite loud, small bearings... I hope they won't fail soon as this motor is almost non-repairable. Screws will strip before loosening. Cannot use heat to burn loctite off as there is magnets on the rotor outside.

Santino | Проверенный покупатель

  • Overall
  • Quality
  • Value

Quality and Price perfect combo

Jul 31, 2019

Great overall motor. Quality/Price it is excellent. Using them on Vesc6+, 55 max amp (At 80amps stator get overload), but increasing the exponential throttle to 30 positive to accelerate and 0.10s positive ramping, make them great for my DIY Hybrid build. Wish they made a version with bigger stator. Very happy with my purchase.

yann | Проверенный покупатель

  • Overall
  • Quality
  • Value

size bad

Jul 18, 2019

je les ai pas encore montés , j'attend la focbox unity . Mais la taille n'est pas la bonne . Ils mesurent 6390.....Pas 6374 ni 6380

Bram | Проверенный покупатель

  • Overall
  • Quality
  • Value

Overall Powerful Motor for good price

Mar 13, 2019

I'm using this Motor now in my Lathe. Because of high max voltage (I use 48V now) and low KV it's a strong BLDC that can push out some power at lower speeds.
Some comments: when I wanted to find out which sensor wire corresponded to which motor wire, I noticed that opening this motor is not a good idea. Most screws will be destroyed before they come loose, they are glued in place. So repairing it yourself if probably not an option. Fortunately I was able to find out the wiring without fully opening the motor.
Works well with VESC in FOC mode. On high speeds it's still a bit loud for my taste, on lower speed it's very quiet. For the rated power, I find it has small bearings, I would have preferred bigger ones, that might also help with the noise on higher speed. But overall it's a very powerful motor in a small package that is a very good fit for my mini lathe.

Excess | Проверенный покупатель

  • Overall
  • Quality
  • Value

Awful quality control and shipping

Jun 29, 2018

The package I received was destroyed and there was nothing protecting the motors. The motors look like they’ve been through war. They are also have spots of sticky gunk all over them. I don’t know if that’s from something leaking in the destroyed packaging or if I was sent a return. Cosmetically these “new” motors are a 4 out of 10. 10 being what a new product should look like.
I haven’t hooked them to power yet as I’m hoping someone gets back to me about the damage first.
100% disappointing.
Weak

Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!