New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy Talon Hexcopter (V1.0) Carbon Fiber Frame - 625 мм

Turnigy Talon Hexcopter (V1.0) Carbon Fiber Frame - 625 мм

Shipped From:
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

5 669,54 руб.
Статус:
Есть в наличии
SKU:
9171000060
WANT FREE SHIPPING? Click here to find out more!

Рама Turnigy Talon V1.0 Hexcopter изготовлен из высококачественной натуральной углеродного волокна предлагая как привлекательный внешний вид и производительность. Наши инженеры намеревались создать Hexcopter кадр без компромиссов, были протестированы несколько материалов и отвергнуто, пока они не решили, что только подлинный углеродного волокна будет соответствовать цели, которые мы поставили, чтобы достичь. Каждый компонент был взвешен и измерен бритье простые грамм, где можно достичь легкий вес, но чрезвычайно жесткий каркас. Мы не давали каких-либо компромиссов и ни вы должны.

Добавленная грузоподъемность конфигурации шестигранной делает этот кадр идеально подходит для проведения больших полезных нагрузок, таких как системы камер и других электронных компонентов. Это делает для исключительной буровой установки камеры или просто очень гибкой и мощной раме мульти-ротор для высшего пилотажа!

Talon Hexcopter строится из тех же высококачественных компонентов, которые используются в чрезвычайно популярной кадре Talon V2 Quadcopter, но мы вновь разработанные основной рамы для использования в конфигурации шестигранной.

В процессе разработки V2 Talon наша команда заняла уже популярный кадр Talon и изучал дизайн, основанный на обратной связи от сообщества мульти-ротора и наших собственных идей мы заново спроектировали двигатель монтажной пластины, допускающие верхнего или нижнего крепления 28 и 35 размер Походные бесщеточные двигатели (фотографии для справки различных вариантов монтажа). Один только усовершенствованная система зажима прошли 3 повторных конструкции, пока наши инженеры не были удовлетворены, что идеальная прочность и экономия веса комбинации была достигнута. в размере зажимная система центральная рама была почти в два раза, чтобы обеспечить сильную фигурную скобку на каждой штанги. Каждый аспект этого кадра был тщательно рассмотрен и продумана.

Все это внимание к деталям привело к элегантной простоте, что является Talon Hexcopter, кадр Hex, что мы, как с гордостью поставить свое имя позади, как вы будете владеть.

Мы также предлагаем полную линейку качества мульти-роторных электроники, таких как платы мульти-ротор управления, ESC, двигатели и многое другое, так что нет никакой необходимости идти на компромисс в вашей установке электроники либо!

Технические характеристики:
Вес: 440г (ж / из электроники)
Ширина: 625 мм
Отверстия под болты двигателя: 16/19 / 25мм

Требуется:
28-XX или 35-XX бесщеточный скороход двигатель х 6
18 ~ 25A Brushless ESC х 6
8x4 ~ 10x4.7 пропеллер х 6 (3 стандартное вращение / 3 назад)
плата управления Multi-ротор
2500 ~ 3300mAh 11.1V LiPoly
4CH передатчик и приемник

  • Артикул 9171000060
  • Brand Turnigy
  • Емкость ( мАч ) -
  • вес 530.0000
  • длина 260.00
  • Packaging Width 60.00
  • Высота 123.00
  • Turnigy Talon Hexcopter Frame
  • Talon Hexacoter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Looks very good quality and sturdy but I haven't built it yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks very good quality and sturdy but I haven't built it yet.

Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.

I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Pros:
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
Cons:
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Tips:
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
Hope

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Pros:
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
Cons:
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Tips:
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
Hope

This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.

If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.

.















great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

.















great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine

Good workmanship, everything fits well and is quickly assembled.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good workmanship, everything fits well and is quickly assembled.

This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

PROS:
-Lightweight
-Sturdy
-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

CONS:
-No instructions

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

PROS:
-Lightweight
-Sturdy
-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

CONS:
-No instructions

I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
No File Name Download [457]
Turnigy Hex w/crab gear Download [2241]
No File Name Download [108]
No File Name Download [93]
talon con gimbal Download [565]
esc Download [119]
connessioni interne Download [127]
Talon and naza Download [590]
ESC support (under the frame) Download [70]
My new exa Download [175]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save