Забудьте эти грязные нитро двигателей и обновить 1/8-й грузовик или багги с TURNIGY Trackstar 2650kv мотором Brushless. Объединить этот двигатель с Turnigy Trackstar 150A ESC для окончательного 1/8 опыта EP.
Технические характеристики:Размер: 41x68
Поляки: 6Max Amps: 129A
Макс Вольт: 17В
Макс Ватт: 2200wХолостой ток: 4.5A
Сопротивление (Ri): 6.2
Размер вала: 5мм
Вес ( г )
Kv ( об / об)
Max Токи (A)
Мощность (Вт ):
Длина В ( мм ):
Может Длина D (мм )
Максимальное напряжение (В )
Вал А ( мм):
Unit Weight (g):
Диаметр С ( мм )
Общая длина E (мм )
Сопротивление ( тк ):
Bought this for my sons traxxas REVO 3.3 brushless conversion motor has a very good build quality and it gives the truck great punch on 3s did have trouble with it fitting into the integy brushless mount but good use with the dremel soon had it fitted so far running very we'll see how it goes in warmer conditionsI've got one of these motors in my Team Durango DEX408 with a Hobbywing Xerun 150Amp ESC 60T spur,19T pinion and 2x 2S lipo and the speed and power is awesome.....WOW !!
Highly recommended motor, and excellent value for money.
I did a speed calculation (gear ratios, tyre diameter, volts etc etc) and the result was 124km/h which wouldn't surprise meI installed this motor in my Traxxas Slash 2WD. The car was just awesome. The gas response is lightning fast and the motor torque at low rpm. Other strategic car parts are, Mamba Monster ESC, Battery Thunder Power 3S 5000mAh 70C, spurgear 86, pinion 28, the drive shafts are thicker MIP, the rear tires Pro-Line Sling Shot, car body Anza LCG, as well as aluminum gearbox.
car's center of gravity is almost in the middle of the car, and it allows for a staggering acceleration without the bow immediate boarding.
There is nothing on the market differential will not take longer than ten batteries. Now I have put the differential in place of the direct axis and the car runs just fine. Lock the rear grip increased incredibly a lot. The car is surprisingly easy to drive on the soft sand although there is no differential.
One charge has not run for very long. I replaced the engine 10AWG wires, and they warm up a bit. Cables are long, though, because the center of gravity because of installed right in front of the governor, as soon as the back side of the bumper.
ESC is not very hot, but the fan rotates while driving, and goes out shortly come to a standstill.
Engine stays pretty cool. It can hold your hand.
Previously, I had the engine of Neu-Castle 1415 (2400kV).
Engine differences are huge. I think I'll put up for sale in my Neu :D
I had to slightly modify the buffer that it does not hitThis motor is a beast, ive ran it in my Losi 8ight 2.0 buggy and my 8ight T 2.0 with no problems at all. this thing is bad ass, talk about get up and go. It definitely had my speed control temp up pretty high, but I didnt even mess with the gearing. Its the perfect back up motor to have. I only wish i would have got the sensored one but this was all they had at the US store.Just install it in my Slash 4x4 with Mamba Monster, 2.8" Proline Badlands & 17/52 gearing.
> Forget your original drive-shaft (life time with this motor: few seconds).
Insane in 3S, I have to check in 4S (need to find the good timing).
Seems to be similar to Toro X8 2D & Tenshock x802 but less than 1/2 the price!
After happening the good timing, i'll uodate the feedback.Yo compre este motor solo por curiocidad ya te tiene los mismos Kw del mamba monster 2650 y el precio es 3 veces menos que este.
Actualmente lo corro en mi Slash 4x4 con un ESC mamba monster y uso baterias 2S el motor mantine muy buena temperatura y 3S al final de unos 15min de correr el motor calienta, uso spur 51t y pinion 25t, eso tb afecta a la temperatura del motor.
Mi Slash con esa configuracion es una bala, y el motor paga su precio de lejos, excelente motor para ese precio. Lo recomiendo.i received the turnigy 2650kv motor installed it in a losi 2.0 late model and it stated making noise vibrating & getting hot on the very first test in my driveway just like several other reviews stated it is a crap shoot !! i thought i would give one a try and it cost me $20 in shipping so i would not recommend this motor until hk does better job on the quality control on it...............
the customer service on the return was good but they issued me store credit instead of a refund. i had to buy another motor to use while i waited on them.I was very impressed by the quality of this motor for the price. In my emaxx, i got it up to about 80 mph with this motor, and a 4s lipo! very pleased with this motor and i will be using this for any other projects i have! If your thinking about this motor or a mamba monster, get this one!ok I just installed mine with this ESC: Hobby King 150A High performance Brushless Car ESC - code: HK150A
I get 49.5 Km/h in street, pinion 17T; spur 54T, 2 S lipo
I will upload some imagespower full really fast at my hpi savage brushless