New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy TY-P1 25Amp HEXFET Бесщеточный контроллер скорости

Turnigy TY-P1 25Amp HEXFET Бесщеточный контроллер скорости

Discontinued Product

Please continue searching for a similar product.
Вес:
70 g
SKU:
TYP1-25A
WANT FREE SHIPPING? Click here to find out more!

Turnigy TY-P1 25Amp ESC является выделиться исполнителем. Использование качественных ИК HEXFET® Силовые МОП-транзисторы, разработанные в США, это ESC является кабель обработки потребляемого тока свыше 40 ампер. Однако это в доме по проекту ESC был разработан и изготовлен командой инженеров Hobbyking с одной целью, качества и надежности. Вместо того, чтобы над скоростью УНК и подтолкнуть ее к пределу с большим радиаторе, как это делают многие компании, мы хотели создать контроллер скорости для тех, кто ищет решения пуленепробиваемые. Мы используем SMT технологии, а не ручную пайку производить стабильное качество и надежность каждый раз. TY-P1 25A ESC также имеет независимые регуляторы напряжения (один для БЭК и один для MCU) это обеспечивает MCU будет оставаться под напряжением в случае высокой моментальной усилителя дро из схемы БЭК и наоборот. An XT-60 разъем батареи и 3,5 мм пуля разъемы были предварительно спаяны для удобства.

Технические характеристики:
Прод. Ток: 25A
Выброс ток: 50A
BEC: 5Volts / 2amps
Вес: 42,5 грамм (включая провода и вилки)
Батарея штепсельной вилки: XT-60
Мотор Штекер: 3,5 мм разъем Пуля

Параметры программирования:
Тормоз (OFF / ON).
Пороговые Тип (Soft-вырезать / отсечения).
Пороговые напряжения (низкий / средний / высокий).
Режим старта (Normal / Soft / Very Soft).
Режим синхронизации (низкий / средний / высокий).
Cell (Авто, 2S, 3S, 4S).

Примечание: Программирование может быть сделано с помощью дополнительного программирования карты. Показать похожие пункты ниже.

Это ESC требует от пользователя, чтобы установить диапазон газа на установке. Пожалуйста, скачать инструкцию для получения дальнейших инструкций.

HEXFET® является зарегистрированной торговой маркой компании International Rectifier Group Калифорния, США.

  • Артикул TYP1-25A
  • Brand Turnigy TY-P1
  • Емкость ( мАч ) -
  • Вес ( г ) 70.00
  • длина 120.00
  • Width 10.00
  • Высота 100.00
  • Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

love these ESC great for bigger planes like the Flite Test Guinea Pig

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

love these ESC great for bigger planes like the Flite Test Guinea Pig

come da descrizione all'atto dellla vendita, molto soddisfatto

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

come da descrizione all'atto dellla vendita, molto soddisfatto

Very good esc , easy card programming for multirotor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good esc , easy card programming for multirotor

This is very good for my Quad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is very good for my Quad

Great works perfectly with my ft Guinea pig and just like vid says this wax is meant to be 40 amp

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great works perfectly with my ft Guinea pig and just like vid says this wax is meant to be 40 amp

Tought it was broken, but is didn't calibrate it... normally you don't have to wait so long to calibrate it but its ok. Actually these are pretty nice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tought it was broken, but is didn't calibrate it... normally you don't have to wait so long to calibrate it but its ok. Actually these are pretty nice

I actually have 17 of these in various multirotor aircraft that have worked perfectly for years now. They are reflashed with SimonK firmware. These were bought some time ago. I bought one recently that did burn out when setting up a FPV plane, I think it was a bad solder joint either on the esc or on one of the extensions I was using because the motor kicked back and forth when trying to power up and that's a sure sign of a bad connection.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I actually have 17 of these in various multirotor aircraft that have worked perfectly for years now. They are reflashed with SimonK firmware. These were bought some time ago. I bought one recently that did burn out when setting up a FPV plane, I think it was a bad solder joint either on the esc or on one of the extensions I was using because the motor kicked back and forth when trying to power up and that's a sure sign of a bad connection.

The moment I plugged this in it blew up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The moment I plugged this in it blew up.

I can't recommend this product to anyone. Please avoid this product.

I had some test flights (5mins?) with my new quadcopter and these ESCs yesterday. After some KK2.1 parameter tuning today, I went to field to test new configuration. Right after plugging in the battery (Turnigy 2200mAh, 3S), I noticed some propeller movement, spark sounds from the esc AND SMOKE FROM THE ESC! Esc warmed a bit and is for sure broken.

Please note: the esc burned right after plugging in the battery. No throttle, no overload.

Now I am considering whether I should replace all my ESCs because if one burns like this, others may also. Next one might burn the flight controller and/or motors, if this one already didn't...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can't recommend this product to anyone. Please avoid this product.

I had some test flights (5mins?) with my new quadcopter and these ESCs yesterday. After some KK2.1 parameter tuning today, I went to field to test new configuration. Right after plugging in the battery (Turnigy 2200mAh, 3S), I noticed some propeller movement, spark sounds from the esc AND SMOKE FROM THE ESC! Esc warmed a bit and is for sure broken.

Please note: the esc burned right after plugging in the battery. No throttle, no overload.

Now I am considering whether I should replace all my ESCs because if one burns like this, others may also. Next one might burn the flight controller and/or motors, if this one already didn't...

Bought 4 of these since they were suggested by HK for my quad project. I would not suggest getting these to use with the Multiwii board. After many, many hours of work 1 works all the time, 1 works sometimes, and 2 just beep. They all work fine connected directly to a Spektrum receiver. I don't think they communicate well with the multiwii.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 4 of these since they were suggested by HK for my quad project. I would not suggest getting these to use with the Multiwii board. After many, many hours of work 1 works all the time, 1 works sometimes, and 2 just beep. They all work fine connected directly to a Spektrum receiver. I don't think they communicate well with the multiwii.

Customer files
Manual Download [89]
Back TY-P1 Macro Download [304]
Capacitors Download [2630]
Capacitors Download [3339]
pin-out-better Download [140]
melted ground wire Download [121]
3 of 6 burn out of the box Download [1074]
3 of 6 burn out of the box Download [885]
Manual Download [93]
pin-board to flash without soldering Download [2659]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save