New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy ™ TGY-6114MD Цифровой парус Лебедка Servo (барабанного типа)

Turnigy ™ TGY-6114MD Цифровой парус Лебедка Servo (барабанного типа)

Shipped From:
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

2 429,37 руб.
Статус:
Есть в наличии
SKU:
9295000014-0
WANT FREE SHIPPING? Click here to find out more!

Мощный высокими техническими характеристиками цифровой парус лебедка серво с металлическими шестернями, которые могут быть запрограммированы для работы от 1 до 6 витков (под контролем регулировки конечной точки). Этот парус лебедка сервопривод может работать до внушительной 14.5kg крутящего момента, так что идеально подходит для больших яхт.

Технические характеристики:
Включает: 1-6 программируемые
Диапазон напряжения: 4,8 ~ 6.0V
Скорость: 0,72 ~ 0.60sec 360 °
Крутящий момент: 12.32 ~ 14.5kg
Не ток холостого хода: 0,12 ~ 0.14A (без нагрузки)
Рабочий ток: 0,40 ~ 0.50A
Срыв ток: 1,80 ~ 2.20A
Gears: Металл
Размер: 40,3 х 20,3 х 38.7mm
Диаметр барабана: 35.5mm
Вес: 61g
Разъем: JR стиль с длиной провода 265mm

  • Артикул 9295000014-0
  • Brand Turnigy
  • вес 105.0000
  • длина 95.00
  • Packaging Width 35.00
  • Высота 75.00
  • Крутящий момент ( кг ) (мин . 0,01 кг ) 14.50
  • Скорость (п / 60deg ) 0.60
  • А ( мм ) 44.00
  • В ( мм ) 40.00
  • С ( мм ) 42.00
  • D ( мм ) 20.00
  • Е ( мм ) 58.00
  • F ( мм ) 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very good value good replacement for drum sail winches.
Note must use computer aided radio to set end points and
turn radio on before boat and turn boat off before radio.
used on Marblehead rc sailboat with A-Rig on in 12 to 15 knots
of wind winch had no problems sheeting in the rig even though
the boat was over powered conditions were B-rig borderline C-Rig.
mike

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good value good replacement for drum sail winches.
Note must use computer aided radio to set end points and
turn radio on before boat and turn boat off before radio.
used on Marblehead rc sailboat with A-Rig on in 12 to 15 knots
of wind winch had no problems sheeting in the rig even though
the boat was over powered conditions were B-rig borderline C-Rig.
mike

Hi, I bought 2 of these (1 for a spare) and found that unless you can programme them, they can cause a lot of model damage. For example: The winch works fine if the servo pulse is KEPT between the accepted standard of 1 to 2 mS. With both of mine, if a pulse gets down to around ).8 mS, the servo will CONTINUE to rotate until something breaks. An example where this might happen is with the Turnigy 6XS Tx, whose throttle (winch) output goes to 0.75 mS if the radio is switched on without the throttle stick at "idle"...Crunch! Also, with the end travels set at 100pcnt, all chanels go outside of the magic 1 to 2 mS "standard".

Please, HobbyKing, bring on the programmer/instructions. This is not a cheap servo and can do a lot of damage, if travel cannot be limited.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, I bought 2 of these (1 for a spare) and found that unless you can programme them, they can cause a lot of model damage. For example: The winch works fine if the servo pulse is KEPT between the accepted standard of 1 to 2 mS. With both of mine, if a pulse gets down to around ).8 mS, the servo will CONTINUE to rotate until something breaks. An example where this might happen is with the Turnigy 6XS Tx, whose throttle (winch) output goes to 0.75 mS if the radio is switched on without the throttle stick at "idle"...Crunch! Also, with the end travels set at 100pcnt, all chanels go outside of the magic 1 to 2 mS "standard".

Please, HobbyKing, bring on the programmer/instructions. This is not a cheap servo and can do a lot of damage, if travel cannot be limited.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!