Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Turnigy ™ TGY-DS3509MG High Torque BB / DS / MG ж / Случай сплава 40кг / 0.12sec / 78г

Turnigy ™ TGY-DS3509MG High Torque BB / DS / MG ж / Случай сплава 40кг / 0.12...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
164 g
Артикул:
9355000039-0
Описание
товара

Turnigy TGY-DS3509MG является очень высокое качество стандартного размера высокого напряжения сервопривод, который является цифровым, ballraced, имеет обработанную случай сплава CNC и оснащен металлическими шестернями для прочности и надежности. Характеристики очень впечатляют, очень высокий крутящий момент, имеет минимум 30кг и способен массивной 40кг, также имеет отличную скорость и идеально подходит для больших вертолетов и самолетов, будет также сделать хороший мощный, быстрый усилитель руля на 1/8 автомобили и багги или крупные моторные лодки.

Особенности:
• Полный сплав станках с числовым программным кейс
• зубчатая передача металла
• Coreless двигатель
• Подшипники шариковые спаренные
• Серводвигатели рожки и монтажное оборудование

Технические характеристики:
Рабочее напряжение: 6 ~ 8.4V
Крутящий момент: 30кг @ 6v ~ 40kg @ 8.4V
Скорость: 0.14sec @ 6v ~ 0.12sec @ 8.4V
Размеры: 40,5 х 21 х 40 мм
Вес: 78g
Двигатель: 20мм диаметр тигельные
Рабочая частота: 1520us / 333Hz, 800us ~ 2200us
Servo штепсельной вилки: тип JR
Servo Lead Длина: 320мм

Product
Specifications

Дополнительная информация

  • Артикул:
    9355000039-0
  • Brand:
    Turnigy
  • Вес ( г )
    164.00
  • длина
    80.00
  • ширина:
    40.00
  • Высота:
    60.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I have used these on my EF HM MXS, PAU Viper, PAU Extra 330 - all 35pcnt on the wings. Love them. Over 150 flights on each. I replaced the original grommets with some hard grommets (made from 3mm ID X 5mm OD) fuel tubing. No slop, and very precise. I am used to buying extra servos so I had bought 14pcs - instead of the 12 needed. I still have the 2pcs unused.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerful, good centering, but no so waterproof. Had some problems with water, splashed, not immersed! Happily the electronics was just fine after a good drying. But after just a few hours on my Yeti XL it let me down!!! The first little gear is no longer attached to the motor shaft. Tried everything that crossed my mind. Alu foil, super glue, tin, pliers... nothing worked. It is really annoying to throw away a perfectly good servo for such a crappy reason.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
. , 5 .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far using about 3 month very good condition.
My rc boat Vector hull before very difficult to handling and after using this servo handling was easier..!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I made a rudimentary comparison of this servo side by side with the JR 8911HV and JR 8921HV on the bench. The Turnigy had barely noticeable more play in the gear train at neutral than the JR8921HV. I didn't detect any other differences on the bench using a Y connector and a Hitec servo tester, but nothing more sophisticated by way of test equipment. I plan to test these Turnigys out thoroughly in the air in a 3D Extra to see how well they hold up over time at 1/3rd the cost of the JRs. I'm impressed with these servos so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
An absolute beast if you need a high torque servo. Im using two on my 4ws Axial Wraith. Speed tests showed an average of .15 at 6v. Just under specs, but every servo ive ever tested has been slightly slower than rated, so im inclined to think that can be attributed to the tester. Centers very well and as others have mentioned its a 25 spline futaba.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.