Ультратонкий радужный Pre-Cut наклейки 490x53mm (4 пары)

• Overall
• Quality
• Value

Customer Rated

Apr 23, 2013

I ordered some of these for my 550 heli and I have to say, the quality of these stickers is not all that great. The reflective material itself is just fine, I have every reason to believe that it would reflect light just as it is meant to do. However, the stickers are badly 'cut' and even using a pair of scissors it is not easy to remove the excess trim. If you do make it past this point, the sticker may or may not be permanently adhered to the backing. I had to go through 6 of these just to get 2 usable stickers, and that's only because I gave up trying to get the whole sticker and settled for whatever I could get. Needless to say, you will also have to rebalance your blades afterward. I feel like I wasted my money here.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 23, 2012

Looks like they are sending random desing. One picture shows 4 different desings - I got the second from top. Bought 3 items and got 3x8 stickers.

One sticker is one sheet, total of 8 sheets. Sticker real lenght is 51cm and measures 56mm at the widest point.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 10, 2011

no gostei do produto muito dificil de se aplicar, gastei os 4 pares e n conseguir colocar nas ps

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 04, 2011

Very nice stickers, all 4 pairs are different design. Easy to fix if use little shampoo water for fixing, let it dry and then peel off extra parts, dont use detergent powder. Look very nice in bright sun light condition.

• Overall
• Quality
• Value

Customer Rated

Dec 13, 2010

This is a nice decal BUT it is die-cut and some of the cuts are not all the way through. The material is really thin. Hint, remove all the parts that you don't want. Then apply some friskit film over the decal. If you don't have frskit, Press-n-Seal will work. Now you can peel the decal off and it will stay in place. You then apply it to the surface, rub it down, and peel the friskit away.



The real problem is there are two of each design but not a left and right. You can't match both sides of a fuse or wings. Three stars because of this and the poor die cutting.

• Overall
• Quality
• Value

Customer Rated

Nov 28, 2010

Olhando pela net lindo, porem quando recebe e uma coisa totalmente diferente.

Nao tem nada de pre cortado, voce nao consegue retira-lo de sua embalagem sem danificar o adesivo.

nao vale a pena compra-lo nao...

• Overall
• Quality
• Value

Customer Rated

Nov 07, 2010

very easy to apply it is using water with soap applied on the blade fully. Than remove all the backing and put the sticker on the blade - You must be able to fully move with all sticker on the blade. Remove unwanted parts and flatten the rest, than finish all by hair dryer READY!!

• Overall
• Quality
• Value

Customer Rated

Oct 23, 2010

IF YOU PLAN TO BUY THESE BUY AN EXTRA PACK, THEY TAKE SOME PRACTICE TO APPLY, FIRST PICK OFF THE PORTIONS YOU DONT WANT TO USE WHILE IT STILL ON THE BACKING, THEN APPLY CLEAR PACKING TAPE OVER THAT LEAVIN A CORNER UN COVERED, THEN HOLD OVER THE BLADE AND APPLY SMOOTHLY, THEN CAREFULLY PEEL BACK PACKING TAPE STARTING WHERE THE EXPOSED PART OF STICKER IS, USE A HEAT GUN CAREFULLY TO SHRINK THE BUBBLES. LITTLE HARD TO WORK WITH BUT ONCE YOU GET THE HANG OF IT NOT SO BAD....THATS WHY YOU SHOULD GET A SPARE PACKAGE...

• Overall
• Quality
• Value

Customer Rated

Sep 30, 2010

It makes my blade shine!!

you cant beat the price

• Overall
• Quality
• Value

Customer Rated

Sep 14, 2010

Not bad product but, does not come off easily, should have cuts in back to remove white backing instead of trying to peel from the front. messed many pieces and never did get one to work. Pieced meal it together.