Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

Warhead 3545-1350KV EDF Мотор 90мм

Warhead 3545-1350KV EDF Мотор 90мм

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 079,88 руб.
Stock:
Вес:
225 g
Артикул:
Warhead1350KV

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Warhead 1350kv EDF Out-бегун двигатель идеально подходит для 90мм (3,5 дюйма) с использованием вентиляторов 7 и лезвие вверх ротора в сочетании с высоким напряжением [5 секунд ~ 6S] Устанавливает, идеально подходит для поддержания максимального потребляемого тока до оптимальных уровней.

Технические характеристики:
RPM / v: 1350kv
Размеры: 67 х 36 мм
Вал: 5.0mm
Напряжение: 11.1V-22.6v [3s ~ 6s]
Вес: 171g
Не ток холостого хода: 2.8A / 11V
Макс лопнуть ток: 65A
Макс Ватт: 1150w
ESC: 70 ~ 80A
Сопротивление: 0,014 Ом
Упорный: 1800g [пример , основанный на Fly Fly 90мм вентилятор / 6с]

Монтажное отверстие Болт Круг: 26mm
Mtg. Отверстие Число & Размер: 4 х M3

Product
Specifications

Дополнительная информация

  • Артикул:
    Warhead1350KV
  • Brand:
    Нет
  • Вес ( г )
    225.00
  • длина
    88.00
  • ширина:
    45.00
  • Высота:
    50.00
  • Kv ( об / об)
    1350.00
  • Max Токи (A)
    65.00
  • Мощность (Вт ):
    1150.00
  • Длина В ( мм ):
    67.00
  • Может Длина D (мм )
    28.00
  • Максимальное напряжение (В )
    22.00
  • Вал А ( мм):
    5.00
  • Unit Weight (g):
    171
  • Диаметр С ( мм )
    35.00
  • Общая длина E (мм )
    86.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I use this motor in Proxima II glider (2.8m wingspan, 2kg all up weight). I did buy this originally for EDF, however the kV is bit too low. But for Proxima it is perfect fit. My configuration is: 10x6 propeller (Graupner CAM), Turnigy Plush 60A, 3S Zippy Compact 3700mAh 25C, MP Jet turbo spinner with 45mm span. Power input is approx. 550W, I cannot measure thrust but it is more than sufficient. The motor runs perfectly smooth and is cold after landing (also because I use motor to get glider up, not for normal flight). I am very happy with this cheap and powerful motor.
Quality
Value
Overall
Quality
Value
Overall
I honestly have to express my gratitude to have access to all what hobby kind have to offer at it's incredible prices! but specifically with this particular motor! will it have been just to expensive to put 4 screws to mount the motor? I mean if at the prices of high volume production they may have to pay an extra dime! it will have been just to much!
Quality
Value
Overall
Quality
Value
Overall
Tried this in fly fly hawker hunter, stock 7 blade fan, motor seems solid enough if kept to its stated limits, pulled nearly 100A wot not good. Ground tested in garden lasted less than 30 seconds 20 at 3/4 throttle and about 7 full i have it on vid, did look good though smoke bellowing out the back. Tested with DC clamp meter didnt get a chance to plug in my emeter, would limit this to 5s or use a fan with less blades. Dont mind the loss at this price, it was a test, even though its kind of a recommended motor for this setup it did drive home the message if you got a plane that needs a 90mm 6s setup look a bit further than a $18 motor.
Quality
Value
Overall
Quality
Value
Overall
Nice motor well built, however no data sheet included and no mounting screws or bullet connectors this is usually included with most motors. overall a good buy despited shortcommings
Quality
Value
Overall
Quality
Value
Overall
The motor is well boxed and comes with the right fittings etc. The motor is well finished and the winding look professional. Have not been able to fire up at this stage but will report back if there is anything untoward
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.