Description

Derived from XFly Swift 2100 glider, X2100 is a FPV carrier aircraft designed by XFly Model team specially for FPV hobbyists. The X2100 adopts a glider layout design with a high aspect ratio, which has natural advantages in flight time and flight stability. Twin power systems allow it to easily achieve 1:1 thrust-to-weight ratio, and the large wingspan design of the aircraft provides ample space for future payload additions. Capacious battery compartment allows for common 4s Lipo batteries or 21700 batteries for optimised flight times.

All components of the X2100 can be assembled without glue and fixed with screws, featuring a safe and reliable design. A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself. Twin powers distributed on each side, plus the reasonable match of axle distance and propeller, free you from the risk of propeller damage while landing.

Features

• The layout design of the glider has natural advantages in flight time and flight stability.
• Twin power systems and the large wingspan design providing ample space for future payload additions.
• Capacious battery compartment allowing for common 4S LiPo batteries or 21700 batteries for optimised flight times.
• All components can be assembled without glue and fixed with screws, featuring a safe and reliable design.
• A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself.
  
  

Technical Specifications

• Wingspan: 2100mm/82.7''
• Overall Length: 1050mm/41.3''
• Flying Weight: 1500g
• Motor Size: 2212-KV1400 *2
• ESC: 40A *2
• Servo: 9g servo*6
• Channels: 5CH- aileron, elevator, throttle, rudder, flap
• CG: 50mm from the leading edge
• Wing Load: 38.5g/dm2
• Wing Area: 35dm2
• Recommended Battery: 4S 2600-3300mAh, 21700-4S1P-5000mAh, (21700-4S2P-10000mAh)
• Approx Flying Duration: 10-30 mins
• Assembly Time: 15 mins
• Skill Level: Beginner
• Age Level: 14 years +
• Flap: Yes
• Retract: No
• Prop Size: 8x5'' *2

Content

• XFly Tasman 1500mm PNP?(Bush/Trainer)
• Propeller: 2 blade
• Motor: 1x Brushless Outrunner?3536-KV900
• ECS: 40A
• Servos: 9g digital servos x 6

Required

• 5 channel transmitter and receiver (not included)
• 3S/4S Li-Po battery balance charger (not included)
• Recommded 3S/4S 2200~3300mAh Li-Po battery (not included)