Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

XK3650-3200KV Sensored Бесщеточный Inrunner (15.5T)

XK3650-3200KV Sensored Бесщеточный Inrunner (15.5T)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
248 g
Артикул:
XK3650-3200KV

Combine

essential items and
acc
Описание
товара

Спекуляции.
Max Amps: 25A
Макс Вольт: 7.4V
Макс Ватт: 185W
Обороты / V: 3200kv (15.5T)
Сопротивление: 0,0265 Ом
Нет нагрузки Ток: 2.5A (7.4V)
Размеры: 35.8mm х 52,5 мм
Монтажная глубина отверстия: 4 мм
Длина вала расширения: 15мм
Диаметр вала: 3.175mm
Вес: 165г

Product
Specifications

Дополнительная информация

  • Артикул:
    XK3650-3200KV
  • Brand:
    Не применимо
  • Вес ( г )
    248.00
  • длина
    78.00
  • ширина:
    37.00
  • Высота:
    57.00
  • Kv ( об / об)
    3200.00
  • Max Токи (A)
    25.00
  • Мощность (Вт ):
    185.00
  • Длина В ( мм ):
    53.00
  • Может Длина D (мм )
    44.00
  • Максимальное напряжение (В )
    7.00
  • Вал А ( мм):
    3.18
  • Unit Weight (g):
    165
  • Диаметр С ( мм )
    36.00
  • Общая длина E (мм )
    67.00
  • Сопротивление ( тк ):
    27.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
AWESOME motor! i am running a HSP bronto (same as Exceed infinitive, Redcat Volcano EPX, and himoto makes something similar)... stock size tires (120-125mm), stock diff (2.92:1), and a 19t pinion on 64t spur... temps are around 100-110F with low timing... and i get about 30-40 mins of runtime from a 2S 5200mah lipo

this link can help with gearing http://www.scriptasylum.com/rc_speed/top_speed.html
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good Price! Appearance is also good!

My TT01 is a 22-55 gear ratio settings.

PRODUCT ID: HK-SENS-35A and matching

Good start! And a smoother ride

Also recommended is 100mm Sensor Lead with Mesh

Cogging Torque is then disappears.

Nice HK~!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this for a B44 I'm building up. It's my 1st real rc car so I don't have a lot to compare it to, but I've ran it a couple time now and am very satisfied. I'm using the sensored hobby king 60A controller and 3S lipo, 18T pinion on stock spur gear. It's fast and the motor doesn't seem to be getting more than slightly warm. It has enough power and torque that it's hard to control, it will do 4 wheel burn outs if you don't modulate the throttle. Not sure how it would stack up against a name brand brushless, but it seems to be a well built motor. We'll see how it does over time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice motor, works very well in my SC10 2wd. It is probably a 10.5T winded motor. It gets every time about 50-60 motor temperature after a drive with a 40C LiPo. I drive my SC10 on an outdoor clay track in south-germany. Outdoor temperature was about 25.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad little motor, arrives in plain packaging, motor looks solid, although sensor port is a bit rough in finish, easy to solder leads to, worked well in sensored mode on a SC10 geared 18/84, very smooth, good torque and came off at 110f after 15 minutes of hard running.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.