Become a Dealer Блог
Зарегистрируйтесь

Итоговая цена

0,00 $

Корзина 0 Корзина 0 Loading...

[Sub-250g] ZOHD Drift (PNF) FPV Pusher Glider 877mm (EPP)

Generating Links

[Sub-250g] ZOHD Drift (PNF) FPV Pusher Glider 877mm (EPP)

Цена:

Now save сохранить 12,00 $ 12,00 $

Special Price 79,99 $ 79,99 $

You save сохранить 12,00 $ 12,00 $

Was  91,99 $

Количество:
Отправлено из:
  • USA
Статус:
В наличии
Артикул:
1021670014

COMBO DEAL : [SAVE 15] ZOHD Drift Pusher Glider with OrangeRx R615X Deal

Total Price

100,07 $

Total Savings

15,00 $ (14.99%)

COMBO Price

85,07 $

Хотите бесплатную доставку? кликните сюда Узнать больше!

Аксессуары

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.


The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.


The empty weight of the Drift is a meager 162g, so it can very easily be kept under the FPV registration threshold of 250g. You will still need though, to check your country's regulations, some do require you to register a model airplane with a camera on even if it is below 250g.


Being Plug-N-Fly (PNF), the Drift is supplied with a 1406-2600KV brushless motor, 30A brushless ESC w/5V 2A BEC, propeller, 2 x 4.3g servos, and 1 x 8g servo. The recommended battery (not supplied) is either a 2S 900~1500mAh or a 3S 800~1100mAh LiPo battery pack.


Features:
• Specifically designed as an extremely tough, and stable flying FPV platform
• AUW is below 250g to reduce the amount of legislation required to operate as an FPV UAV
• Supplied as PNF with motor, ESC, propeller, and servos
• Removable wing and tail boom for easy transportation
• Molded in tough EPP foam with H-girder spar, and CF reinforcement
• Highly accurate CF control system for precision control
• Pusher prop configuration for the perfect FPV experience


Specs:
Type: ZOHD Drift (PNF) FPV Pusher Glider
Wingspan: 877mm (34.52")
Length: 688mm (27.08")
Motor: 1406-2600KV
ESC: 30A brushless w/5V 2A BEC
Prop: 5x3 3-blade
Servo: 2 x 4.3g, 1 x 8g
Materials: High-quality EPP foam and CF
Empty Weight: 162g


Included:
1 x ZOHD Drift airframe
1 x 1406-2600KV brushless motor
1 x 30A ESC w/5V 2A BEC
2 x 9g servo
1 x 5x3 3-blade propeller
1 x Hardware pack


Required:
A 4ch or more transmitter and receiver
FPV gear


3S Setup:
1 x 3S 800~1100mAh LiPo battery pack
1 x 5x3 3-blade prop


2S Setup:
1 x 2S 900~1500mAh LiPo battery pack
1 x 5x5 2-blade prop

  • IC / 2 : Елец Electric
  • Motorsize ( диам - или - сс) 14.00
  • Размах (мм ) 877.00
  • Length(mm) 688.00
Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

MarkW | Проверенный покупатель

  • Overall
  • Quality
  • Value

Not enough power to fly

May 24, 2025

The plane had not enough thrust to fly with the supplied propeller. I will have to experiment with larger propellers to see if I can get it to fly

HK: This is unusual, please check that you have the propeller on the correct way around. The front of the propeller should face towards the front of the plane, and looking from the front of the plane the prop should have its leading edge on the left side and it should rotate anti-clockwise. As another note, a larger prop will most probably not work.

Willy | Проверенный покупатель

  • Overall
  • Quality
  • Value

Fun glider

May 18, 2025

Bought this just because. Don't do fpv. I made a nose cone to cover the camera space and added a rudder. I've found this to be a fun and capable glider. Have had many hour long flights with one burst of motor. And landing on a 50x 8 foot strip. I've had a blast with this little guy. In 20 minutes can be broken down and put back in its box witch is amazing for travel.

old_robot | Проверенный покупатель

  • Overall
  • Quality
  • Value

Light & Easy

Apr 26, 2025

My very first fixed wing. Have it on 2s with a speedybee wing mini fc and a walksnail 1s vtx. A little bit challenging to fit everything but absolutely doable! Great airflow if you put the vtx behind the camera (sideways). No issues with heat at 700mW. My GPS unit needed a bit more space than provided. The plane is awesome! No crash and takeoff on second throw! I’m super happy and would buy it again if I didn’t have it already! Don’t forget to activate motor braking for better sparring and gliding!

Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!