Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

ZTW серии Спайдер 18А OPTO Multi-Rotor ESC 2 ~ 4S (BLHeli / Simonk Firmware)

ZTW серии Спайдер 18А OPTO Multi-Rotor ESC 2 ~ 4S (BLHeli / Simonk Firmware)

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

515,67 руб.
Stock:
Вес:
40 g
Артикул:
164000068-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Серия ZTW Паук ЭСК являются отличным выбором для любого размера многокамерных ротора.

Разработанный с нуля для простой установки и легкой установки и предварительно прошит Simonk OneShot 125 прошивкой, чтобы дать быстрый, супер-гладкая, линейный отклик дроссельной заслонки, который идеально подходит для мульти-роторов.

Наряду с превосходным качеством сборки, ZTW паук ЭСК оснащены тепловой защитой от перегрузки и автоматический дроссель отключения в случае потери сигнала.

Особенности:
• Разработан специально для использования мульти-ротор
• Предварительно мелькали с завода с микропрограммой Simonk
• Использует мощный, высокопроизводительный MCU
• Супер-гладкая и точная реакция дросселя
• Автоматическое дроссельная закрыта в сигнальной ситуации теряют
• тепловая предохранение от перегрузки по безопасности
• Безопасный запуск, двигатель не будет работать до тех пор, ESC правильно вооружен
• Низкое внутреннее сопротивление
• Программируемый с помощью дроссельной заслонки палки (см инструкции в разделе "Файлы" на вкладке)

Технические характеристики:
Постоянный ток: 18A
Макс Взрыв ток: 30A
Входное напряжение: 2 ~ 4S LiPoly
BEC: ОРТО
Размеры: 43 х 22 х 12 мм
Вес: 5,3 г

Пожалуйста, обратите внимание: Отсутствие батареи или разъемы мотора не поставляются.

Product
Specifications

Дополнительная информация

  • Артикул:
    164000068-0
  • Brand:
    Нет
  • Вес ( г )
    40.00
  • длина
    210.00
  • ширина:
    20.00
  • Высота:
    130.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Excellent ESC's. They have been rock solid performers and never even get warm running the Multistar Mini Monsters on 4S.
Quality
Value
Overall
Quality
Value
Overall
Bought a bunch of these during the last sale. They're terrific ESC's and appear to be more reliable than the DYS SN20A's. The only thing I don't like about them is the difficulty in soldering to the motor wire pads. They use a horrible lead free solder and it's a pain to remove the stock wires. They should sell these with a wire-free version. The pads are really close to the chips so it would be easy to accidentally damage a component.
Quality
Value
Overall
Quality
Value
Overall
Got these in the mail, excitedly soldered them in. Made sure polarity was right, plugged into my SPRacing F3, plugged in the battery and... instant smoke from one ESC, which took out a motor with it. Now the remaining 3 ESCs get incredibly hot just from having a battery plugged in. I've quadruple checked polarity, and it's all right. As soon as I plug them into my FC they start heating up rapidly.

Not great.
Quality
Value
Overall
Quality
Value
Overall
Well this is awesome, it is smallest than a 12A ESC, lighter and I hope that can handle the job. Its measures: 22x12x5 mm and weighs 5 grams. Motor wires and battery wires has about 55 mm of length and Rx wire has 165 mm of length including connector. Heat shrink tube is transparent which is very nice and I am very excited to install them .
Quality
Value
Overall
Quality
Value
Overall
Recommended, tiny size honestly about half the physical size of an Afro 12A.
Quality
Value
Overall
Quality
Value
Overall
Good ESC, mine arrived with blheli firmware, i don't know what bootloader but pay attention that the problem with naze32 and cleanflight are true In my case the motor scroll a little when throttle is at 0.
Changing board to CC3d all works perfectly.
Quality
Value
Overall
Quality
Value
Overall
I bought 4 of them for my 250 size quad.
Quality
Value
Overall
Quality
Value
Overall
Bought these for use on a FPV250 quad and they work great with the Naze32. I bought 5 of these and 1 turned out to have a slow response compared to the others, luckily I had the 1 spare. Could just be it wasn't flashed with the same firmware.
Quality
Value
Overall
Quality
Value
Overall
O good escs, but in my case I needed to reflash because Bheli version not compatible with betaflight firmware.

HK forgot to reflash with last Bheli firmware.
Quality
Value
Overall
Quality
Value
Overall
Bought 4 to try out on my QAV210, work very well and power seems to be better than the DYS20A. I bought another 16 to replace those DYS20A which i keep having problem even new from pack. I will no buy DYS anymore as the ZTW works better and cost less.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Spider ESC Manual download now [1117kb]
Weight download now [351kb]
Flyer download now [1322kb]

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.