SCRATCH/DENT - C1 Flowmaster Twin Catarmaran 920EP (ARR) (AU Warehouse)

Grab a bargain with this slightly damaged item.

This boat has a crack in the right hand hull near the prop shaft, easily repaired by anyone with  little knowledge of boat repairs.

The HobbyKing® C1 Flowmaster Twin Catamaran arrives Almost Ready-to-Run (ARR), needing just a 2-channel surface transmitter and receiver, along with two 3S 11.1V 3000~4000mAh lipoly battery to get it going. The Class 1 offshore racing style hull has been skillfully produced with hand laid fiberglass and then expertly finished with colorful graphics that are then clear coated to a high gloss finish. What sets the C1 Flowmaster Twin Cat apart from other ARR boats is not just the quality of the final finish, but the sharply molded hull lines. This increases precision and tracking, important in the world of boat racing.

Powering the C1 Flowmaster Twin Cat are two 2860 3300kv watercooled inrunner brushless motors mated to fully adjustable, CNC ball bearing supported outdrives. The driveline angle can be adjusted to suit different conditions, whether you want to run wet, or on the ragged edge of nose high. Access your motor and battery through a magnetically secured hatch. A laser cut plywood battery tray also serves as the ESC, receiver, and servo mount. Included in the box is a laser cut plywood display stand, spare propeller, balloon for waterproofing your receiver, and a roll of waterproof hatch tape for double security on that battery hatch.

For performance and good looks at this killer price, the HobbyKing® C1 Flowmaster Twin Cat can't be beat. Rule the waves in style!

Features:
• Almost Ready to Run - Just install batteries and your own radio
• Light weight, hand laid fiberglass hull
• Bright colorful graphics pre-applied
• High gloss clear coat finish
• Fast access battery hatch
• Twin watercooled brushless motors with adjustable CNC alloy outdrives
• Laser cut plywood display stand
• Includes waterproof tape, spare propeller, and balloon for waterproofing your receiver
• Spare parts available, check listing below

Specs:
Length: 920mm
Width: 238mm
Motor: 2 x 2860-3300kv Brushless outboard motor
ESC: 2 x 60A Watercooled Brushless w/ XT60 connector
Servo: 1 x standard size

Required:
2 Channel Transmitter and Receiver for Surface
2 * 3S 11.1V 3000~4500mAh Lipoly Battery

Note: if using the suggested batteries listed in the accessories listing you will need the HXT 4mm to XT-60 Battery Pack adapter (2pc per bag) x 2

Warranty:
No warranty available for this item.
Item used as a display item only.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.

Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.

Item will be deactivated once a 0 stock level is reached.

For full details please see PRODUCT ID: 9232000032-0