TrackStar ROAR Approved (13.5T) 1/10th Stock Class Brushless ESC and Motor Combo

TrackStar ROAR Approved (13.5T) 1/10th Stock Class Brushless ESC and Motor Combo
Copy and Share the Below URL
Accessories
To celebrate the TrackStar 1/10th 80A Turbo brushless ESC and Motors receiving ROAR approval, HobbyKing are now introducing the TrackStar ROAR approved 1/10th tock Class Brushless ESC and Motor Combo set!
The ESC features a CNC alloy case top which incorporates the heatsink for the Mosfets, neat terminal cups for both the battery input and ESC output cables. The ESC software has a large number of user programmable settings such as Punch, initial brake, drag brake, boost timing RPM, boost timing, Turbo timing, Turbo delay, Turbo ramp, boost acceleration - allowing this ESC to be customised in nearly every way you could ever need for 1/10 scale on or off road racing!
The motor features a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.
ESC Specs:
Max Voltage: 2S Lipoly / 6 cell NiMH
Motor limit: 10.5T
Resistance: 0.0004 ohm
Operating current: 80A
Burst Current: 380A
Bec Current: 3A
Bec Voltage: 6V
"Blinky" mode (Non-timing mode): Yes
Programming Options:
Operation Mode: Forward/Brake/Reverse; Forward/Brake Only
Initial Brake: 10% ~ 80%
Drag Brake: 0% ~ 40%
Brake Strength: 50% ~ 100%
Voltage Cutoff: None ~ 3.5V/cell
Punch Profile: Level 1 ~ 9
Neutral DeanBand: 1% ~ 8%
Boost Timing: 0deg ~ 60deg
Turbo Slope: 3deg/0.1s, 6deg/0.1s, 12deg/0.1s, 18deg/0.1s, 24deg/0.1s, Fastest
Turbo Timing: 0deg ~ 30deg
Boost Timing RPM: 2000 ~15000
Turbo Delay: Off, 0.05sec, 0.1sec, 0.15sec, 0.2sec, 0.25sec, 0.3sec, 0.35sec, 0.4sec
Boost Timing ACC: 50RPM/deg ~ 700RPM/deg
Reverse Speed: 25% ~ 100%
Drive Frequency: 8Khz, 16Khz, 24khz
Brake Frequency: 1,2,4,8,16Khz
Temperature protection: On/Off
Motor Specs:
Can Size: 540
Turns: 13.5
RPM/v: 3040kv
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 36A
Max Watts: 255w
Can Diameter: 36mm
Can Length: 53mm
Shaft Size: 3.175mm
Weight: 178g
Includes:
ESC x 1
Motor x 1
Sensor wire
TrackStar Sticker
Manual
Now officially approved by ROAR for 13.5 spec stock class race use!
-
Kv(rpm/v) 3040.00
-
Max Current (Motor) (A) 36.00
-
Resistance (mh) 27.00
-
Max Voltage (V) 8.00
-
Power (W) 255.00
-
Shaft A(mm) 3.17
-
Length B (mm) 53.00
-
Can Diameter C(mm) 36.00
-
Can Length D(mm) 34.00
-
Total Length E(mm) 67.00

Jimmy | Verified Buyer
-
Overall
-
Quality
-
Value
Nice Combo
Nov 29, 2021
☆Nefarious☆ | Verified Buyer
-
Overall
-
Quality
-
Value
Never gets hot! Turbo & programmable!!!
Aug 29, 2021
Cavi Mike | Verified Buyer
-
Overall
-
Quality
-
Value
Budget drifters dream
Jul 25, 2021
Stef | Verified Buyer
-
Overall
-
Quality
-
Value
Rock
Jul 02, 2021
Butch | Verified Buyer
-
Overall
-
Quality
-
Value
Trackstar 13.5 combo
Jun 26, 2021
Willburr | Verified Buyer
-
Overall
-
Quality
-
Value
Faulty esc
May 12, 2021
Stevo | Verified Buyer
-
Overall
-
Quality
-
Value
Quality on a budget
Dec 24, 2020
Arjan | Verified Buyer
-
Overall
-
Quality
-
Value
Great
Nov 03, 2020
sliver | Verified Buyer
-
Overall
-
Quality
-
Value
Sutisfied
Dec 06, 2019
Ru5ty | Verified Buyer
-
Overall
-
Quality
-
Value
Good Value
Nov 20, 2019
Turnigy Trackstar 1/10th ESC Manual | Download [86] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!