Turnigy B36-50-09 1500kv Inrunner

• Overall
• Quality
• Value

Customer Rated

Oct 06, 2010

Guter Motor.



Preis-Leistung ist Super!

ISt fr verschiedenste Anwendungen geeignet

• Overall
• Quality
• Value

Customer Rated

Jun 21, 2010

Run this motor in RC8TE 12T pinion 50T spur gear , on 4s lipo is not that fast and running very hot after 5minutes 54degree Celsius and claiming up even with 2 cooling fans, on 5s i think this would run too hot and kill rotor magnet above 60celcius.

better spen more money for better motor mamba monster highly recommended got on best motor on the market no heat issue at all even on 5s lipo.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 22, 2010

Measured motor spec's:

Im: 1,2A (@12V)

Rm: 0,047 ohm

kv: 1464

length: 51mm

weight: 230g

number of poles: 2

connectors: 4mm



The motor is not/poorly balanced (it vibrates a lot even with no load) and has poor quality bearings.

I was going to try this motor for use in a 90mm EDF (modified Midifan) on 8s Lipo, but i think the losses will be too big. Not that impressed.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 06, 2010

sehr guter motor. fr den preis ist gut verarbeitet.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 07, 2009

very powerfull brushless motor, very good quality

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 14, 2009

I converted my Hobbico Super Star EP with this motor, a 30 amp Plush controller, and a FlightMax 4400mah 3s LiPo. This motor is a direct bolt-in replacement with no modification necessary. With the stock 9x5.5 prop, the plane will go vertical for as long as I care to point it that way! With the stock prop, I have more than enough power and all of the components stay cool to the touch. So far, this motor has been great!

• Overall
• Quality
• Value

Customer Rated

May 26, 2009

Tested the motor in the Hoaye 89mm EDF unit,



Turnigy B3650 1500KV, 5S1P 5000 mah (20.5 volts)

AMP Draw 42

Watts Generated 758

Motor Temperature 33C

Static Thrust 3.6 lbs



Turnigy B3650 1500KV, 6S1P 5000 mah (24.7 volts)

AMP Draw 56

Watts Generated 1270

Motor Temperature 48 50C

Static Thrust 5 lbs



Turnigy B3650 1500KV, 7S1P 5000 mah (28 volts)

AMP Draw 63

Watts Generated 1675

Motor Temperature 57 60C

Static Thrust 5.8 lbs

• Overall
• Quality
• Value

Customer Rated

Jan 27, 2009

Belle finition.

Excellent rapport poids/puissance.

• Overall
• Quality
• Value

Customer Rated

Oct 01, 2008

Il motore molto ben rifinito.

Lipo 3S 2250 MaH 25C

Elica ripiegabile Aeronaut 8x7 - giri 11500- Amp 31

Elica ripiegabile Aeronaut 9x7 - giri 11200- Amp 44

Lipo 4 S 2250 MaH 25C

Elica 8x7 Aeronaut giri 14500 Amp 51

Lipo3S

Dopo pi di un minuto al massimo, con elica 8x7 e motore ancora freddo. Dopo i primi voli di test con la 8x7, credo che per un uso discontinuo monter la 9x7 per salite alla massima velocit. Seguir nuovo report

• Overall
• Quality
• Value

Customer Rated

Sep 12, 2008

Very nice small engine ...



Use it in a old hotliner, and it's doing its job very well. But careful - make sure that the engine has enough ventilation to cool it!