After the huge success of the Turnigy Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

There are many new features and updates to make the Evolution PRO the best radio around. Starting with a repositioned on/off switch and a new lanyard attachment point for easier use. There are now stiffer springs to help the sticks and a repositioned screen so that people that are “pinchers” have better control of the sticks plus the user now has access to stick calibration. A momentary button has been added which is great to use as pre-arm on quads. For those that had trouble hearing the buzzer the sound has been made louder and there is haptic feedback. Now you can store twenty different models (instead of five) for easier swapping of models. Firmware has also been updated from the Evolution.

The ergonomically designed case makes for easy use of all controls. The switches are all positioned for comfort and the adjustable length sticks can be tailored to your own requirements. Speaking of sticks, the high quality, ball bearing gimbals are clear and have color changing, programmable LEDs that can change color with the use of the sticks. Two 3-position switches on the back can easily be set-up to change the flight modes. A large monochrome backlit LCD Touch screen makes it easy to program and change the settings in both daylight and night-time.

The Evolution PRO uses the solid and reliable 8 channel 2.4GHz Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology, making it compatible with the iA6, iA6B, iA6C, iA10B range of receivers. The system is supplied with the Turnigy TGY-iA6C Receiver for SBUS/IBUS and CPPM support. Twin omnidirectional high gain antennas are built into the outer case to provide an even more secure radio link and to protect them from damage.

Each transmitter hops between 16 channels in order to reduce interference from other transmitters. The transmitter and receiver have their own unique ID to prevent other RC systems from accidentally connecting to or interfering with the Evolution PRO. There is even a mini USB port for easy charging via a power bank (power pack) or phone charger / USB charger / PC. This can also be used for updates (via PC) or to use the Evolution PRO transmitter as a controller for your favorite RC simulator programs. Now with the ability to disable the RF signal while using simulator mode.

The Evolution PRO comes in either Mode 1 and Mode 2 and is available in black or white for each mode. Get yours now for easier flying.

 

Features:
• AFHDS 2A RF protocol
• Compatible with the iA6, iA6B, iA6C, iA10B range of receivers
• 8 channel 2.4ghz radio with telemetry capability
• i10 style customized Gimbals with dual ball bearing supports
• Illuminated gimbals (adjustable) with stiffer springs
• Soft rubber grips 
• Easy-to-use touchscreen
• SBUS/IBUS and CPPM/PWM support
• 20 Model Memory
• Backlit LCD Screen
• 4 Stick Mode Selection
• USB port for Flight Simulators
• USB charging
• Lanyard attachment point
• Haptic Feedback and louder buzzer
• Range test

 

Transmitter Specs:
Channels: 8
Model type: Fixed wing/ Helicopter / Multi-rotor
RF range: 2.408~2.475 GHz
Bandwidth: 500KHz
RF channel: 135
Protocol: AFHDS 2A
Modulation type: GFSK
Stick resolution: 4096
Low voltage alarm: Yes (<3.7V)
USB Port: Micro USB
Power input: 4.2V
Size: 190 x 170 x 85mm
Weight: 343g
Certificate: CE, FCC ID:N4ZMT6B00, RCM

 

TGY-iA6C Receiver Specs:
Channels: 8
Model type: Fixed-wing / Helicopter / Multi-rotor
RF range: 2.408~2.475 GHz
RF channel: 135
RX sensitivity: -105dBm
Range: >300 meters
2.4GHz system: AFHDS 2A
Modulation type: GFSK
Power input: 4 ~ 6.5V DC
Antenna length: 26mm
Size: 37.5 x 24.2 x 9.0mm
Certificate: CE0678, FCC ID:N4ZIA6COO, RCM
i-Bus port: Yes
Data acquisition port: Yes
Weight: 7.9g

 

Included:
1 x Turnigy Evolution PRO
1 x TGY-iA6C Receiver (with leads)
1 x Micro USB Cable
1 x User Manual