The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

XFLY has used the same care and attention, quality components, and materials that they use on their larger and more sophisticated models to produce the P68, so it is still manufactured to the same high standards that you have come to expect from XFLY. The P68 is manufactured in lightweight, but tough EPO foam, and is supplied complete with twin 1806-1900KV motors, twin 20A ESC, 4 x 9g digital servos, and a fixed tricycle landing gear with steerable nose-gear. Assembly of the P68 is extremely easy, just 3 screws are used, 2 for the one-piece wing, and one for the horizontal stabilizer. The steerable nose-gear is factory installed and the main landing gear just clips in, you are then ready to install your receiver and battery of choice.

The XFLY Partenavia P68 is perfect for novice pilots, but it's also the perfect choice for experienced pilots who want a great-looking, small, lightweight model that is fun to fly in smaller areas. In experienced hands, the P68 is capable of loops, rolls, inverted flight, and many more advanced maneuvers.

Features:
• Supplied Plug-N-Fly with twin brushless motors, ESCs, and propellors
• Digital servos on all flying surfaces
• Quick and easy to assemble, just 3 screws and clip in main landing gear
• Perfect for novices and experienced pilots alike
• Semi-scale model of a Partenavia P68
• Steerable nose-gear
• Constructed of durable, lightweight EPO foam

Specs:
Type: XFLY (PNF) Partenavia P68 Twin Engine Park Flyer
Wingspan: 850mm (33.5in)
Length: 645mm (25.4in)
Flying Weight: 400g (depending on battery used)
Motor: 2 x 1806-1900KV brushless inrunner
ESC: 2 x 20A brushless w/BEC system
Servos: 4 x 9g digital
No of Channels: 4 (throttle/ailerons/elevator/rudder-nose-gear)
Recommended Battery: 11.1V (3S) 800~1300mAh LiPo (not supplied)
Material: EPO foam
Color: Blue/White

Included:
1 x XFLY (PNF) Partenavia P68 Twin Engine Park Flyer airframe in blue/white
2 x 1806-1900KV brushless inrunner motor
2 x 20A brushless ESC w/BEC
2 x 4.5x4 3-blade propellers
4 x 9g digital servo

Required:
1 x 4ch or more transmitter and receiver
1 x 11.1V (3S) 800~1300mAh LiPo battery w/XT30
1 x Suitable LiPo charger

Please note: A copy of the assembly manual is available under the "Manuals/Files" tab