Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

900MHZ 800mW Tx / Rx & 1/3-Zoll-CCD-Kamera NTSC

900MHZ 800mW Tx / Rx & 1/3-Zoll-CCD-Kamera NTSC

Now save Speichern 0,00 € 0,00 €

72,53 €

We are sorry, this product is not available in your country

Status:
Ausverkauft!
Gewicht:
549 g
SKU:
CN80012RX8T
WANT FREE SHIPPING? Click here to find out more!
12 Kanal 900Mhz Tx / Rx-Videosystem mit CCD-Kamera.
Ein High-Power-tx-System für die lange Strecke, klare Video.
Im Gegensatz zu anderen generischen Systemen haben wir einen Kabelbaum hergestellt und enthalten es mit der Kamera, so dass die Tx und Kamera kompatibel und auf der gleichen Spannung liegen.
Wenn Sie Ihre Kamera kaufen und Tx separat die Stecker Polarität und Spannungen können sehr unterschiedlich sein.
Inbegriffen.
1 x SONY CCD-1/3 Zoll Kamera
1 x 900 MHz 8-Kanal-Video-Sender (800mW)
1 x 900 MHz 12-Kanal-Video-Empfänger


Kamera spec.
CCD-Sensor-Typ: 1/3 Farbe SONY CCD
Pixel;
NTSC: 510 (H) * 492 (V) ( im Lieferumfang enthalten)
PAL: 500 (H) * 582 (V)
Scannen-System: Interlaced Scanning
Synchronisation: System: Inter
Horizontale Auflösung: 420 TV-Linie
Minimale Beleuchtung 0.01Lux / F1.2
DSP + CCD: CXD3142R + 405AK
S / N Verhältnis: 48dB
Gamma Modifikation: 0,45
Weißabgleich: Auto
Auto Gegenlichtkompensation: Auto
Objektiv: 3,6 mm
Audio: Nein
Eingangsspannung: 9 ~ 12.6V
Elektrischer Strom 80MA
Electronic Shutter: 1/50 (60) ~ 1 / 100,000s
Videoausgang: 1.0VP-P Composite-Video
Der Betrieb Temp .: -20 ~ 50
Größe: 38 * 38mm
Flugzeit: ca. 60min / 100mAh 3S
 
FPV Tx Spec.
Kanal: 8-Ch, AV-Synchronisation
Leistung: 800mW
Eingangsspannung: 12V
Gewicht: 18 g
Größe: 53x45x19mm
Frequenz: 0.9G 0.910G, 0.980G, 1.010G, 1.040G
  • Artikelbezeichnung CN80012RX8T
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht ( g) 549.00
  • Länge 185.00
  • Breite 70.00
  • Höhe 153.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

well,, I have had mine now for about 5 days.. I have taken it to 3 different places that are miles apart.. I was had hoped to use this for my homemade rc boat but it wont get 100 feet down the creek until it starts to glitch and twitch..im considering on sending back to hobbyking.. it is totally unusable.. if you buy it you were warned!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

well,, I have had mine now for about 5 days.. I have taken it to 3 different places that are miles apart.. I was had hoped to use this for my homemade rc boat but it wont get 100 feet down the creek until it starts to glitch and twitch..im considering on sending back to hobbyking.. it is totally unusable.. if you buy it you were warned!!!

just got mine in two days ago.. put this on my homemade pontoon boat and couldn't get 100 feet away.. I was extremely disappointed!!!! I am going to try again in a different location in a couple days.. IF I get better performance out of it I will let everybody know..
but i have used my 250 mil 5.8 mgz at the same place with no problems for about a mile.
right now mine is on craigslist after owning it for 2 days.. at this point i wish i had never bought it.. and it claims long range...lol

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

just got mine in two days ago.. put this on my homemade pontoon boat and couldn't get 100 feet away.. I was extremely disappointed!!!! I am going to try again in a different location in a couple days.. IF I get better performance out of it I will let everybody know..
but i have used my 250 mil 5.8 mgz at the same place with no problems for about a mile.
right now mine is on craigslist after owning it for 2 days.. at this point i wish i had never bought it.. and it claims long range...lol

It come with inverted connector to camera. check the polarity . It arrived with a bad transmiter, it works only in channel 3

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It come with inverted connector to camera. check the polarity . It arrived with a bad transmiter, it works only in channel 3

I just received this kit today and did some testing. Without commenting on range, this kit has a decent camera with great low light performance. The only downside I see is the RF transmitter is quite heavy. Having a look inside the transmitter it actually is a small module but the manufacturer adds aluminum shims and the external case to deal with heat dissipation. Perhaps this can be modified to be lighter. All in all, not bad for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received this kit today and did some testing. Without commenting on range, this kit has a decent camera with great low light performance. The only downside I see is the RF transmitter is quite heavy. Having a look inside the transmitter it actually is a small module but the manufacturer adds aluminum shims and the external case to deal with heat dissipation. Perhaps this can be modified to be lighter. All in all, not bad for the price.

There are a couple channel with restriction to fly 900MHZ in USA, do Im right?, if yes some body can let me know which one are those?
Thanks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There are a couple channel with restriction to fly 900MHZ in USA, do Im right?, if yes some body can let me know which one are those?
Thanks

I have bought 2 of these,1 a year ago and the second a few weeks ago.The one from a year ago Tx and Rx are great the camera is so-so.I have flown over 4 KM and I'm sure I could go farther.The 1 I bought a few weeks ago isn't the same one as a year ago.Its circuit board layout is different,that is not big problem except it wont fit well with the FPV Fiberglass Pan-Tilt Camera Mount L-Size the connection spot doesn't line up so you will have to used a Dremel like tool to grind material away so you can plug the wires in.Great product but HobbyKing has to redesign the FPV Fiberglass Pan-Tilt Camera Mount L-Size .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought 2 of these,1 a year ago and the second a few weeks ago.The one from a year ago Tx and Rx are great the camera is so-so.I have flown over 4 KM and I'm sure I could go farther.The 1 I bought a few weeks ago isn't the same one as a year ago.Its circuit board layout is different,that is not big problem except it wont fit well with the FPV Fiberglass Pan-Tilt Camera Mount L-Size the connection spot doesn't line up so you will have to used a Dremel like tool to grind material away so you can plug the wires in.Great product but HobbyKing has to redesign the FPV Fiberglass Pan-Tilt Camera Mount L-Size .

Very mad at this product! I have to put 5 crowns just to save this review. When it arrived, it was working flawlessly.. after few days.. can't get anymore signal!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very mad at this product! I have to put 5 crowns just to save this review. When it arrived, it was working flawlessly.. after few days.. can't get anymore signal!

On its first day, it was working flawlessly. I was very happy!! Few days later.. it's working inconsistent. Sometimes I get a signal sometimes I don't. I've already tried cycling the channels of both Vtx & VRx...it just don't work as it should. When I get a signal, I would lose it 5 feet away. Now I'm very mad!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

On its first day, it was working flawlessly. I was very happy!! Few days later.. it's working inconsistent. Sometimes I get a signal sometimes I don't. I've already tried cycling the channels of both Vtx & VRx...it just don't work as it should. When I get a signal, I would lose it 5 feet away. Now I'm very mad!!!

My Tx finally stopped working, I guys since I lightened it up by taking it out of it heavy gold case, it really has to be powered on just before you fly or else it will over heat. My problem was just that, it overheated and the solder inside on the circuit board started to flow. It still worked but I could not change the channel, the display on the tx was fully lit. Took it out yesterday, worked than got noise in the feed and the tx would not power on after that. When it did work fine, I was please with it's overall quality as it was my introductory fpv tx. I'm going to buy another in hopes that I am more careful this time to not let it burn up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My Tx finally stopped working, I guys since I lightened it up by taking it out of it heavy gold case, it really has to be powered on just before you fly or else it will over heat. My problem was just that, it overheated and the solder inside on the circuit board started to flow. It still worked but I could not change the channel, the display on the tx was fully lit. Took it out yesterday, worked than got noise in the feed and the tx would not power on after that. When it did work fine, I was please with it's overall quality as it was my introductory fpv tx. I'm going to buy another in hopes that I am more careful this time to not let it burn up.

1st, so disappointed about the short range ( 100m )

2nd, the connection between the ccd module and tx was incorrect.

I should change the connector holder inversely.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

1st, so disappointed about the short range ( 100m )

2nd, the connection between the ccd module and tx was incorrect.

I should change the connector holder inversely.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
GroPro w/OSD Wiring Download [45]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!