After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the FLYCAT V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways.

The FLYCAT V2 is made of strong EPO so it will take a few hard knocks and bangs, it is also supplied as a Plug-N-Fly model. This means it comes with the motor, fan unit, and retracts pre-installed at the factory. It also comes with 6 x 9g high-quality, high-speed servos pre-installed (metal-geared on the nosewheel) to ensure you complete all those extreme, and fast jet-like maneuvers with reliability and peace of mind. It is a relatively easy build with a low parts count either being screwed or glued together. It is a one-piece model when it is built, but if required, the wing tips can be removed for transport. The big magnetically held canopy/hatch cover provides easy access to the receiver and battery bay, and there is room for a 3000~4000mAh 6S battery.

If you want a budget-friendly EDF jet that will fly fast and has impeccable handling qualities that is suitable for intermediate to advanced pilots then the H-King FLYCAT V2 is for you. This superb EDF jet has been designed to fly, its handling at slow speeds is amazing, and it is a real pussycat to land. So it’s time to get leaping into the sky and do some extreme flying with the impressive H-King FLYCAT V2.

Features:
• V2 version includes upgraded power setup, twin rudders, and electronic retracts
• Colorful, high-viz color scheme
• 12-Blade EDF, 2860-2100KV inrunner motor, and 80A Aerostar RVS G2 ESC preinstalled
• 6 x 9g high-quality, high-speed servos pre-installed (metal-geared on the nosewheel)
• Made from light, strong EPO foam
• Large, magnetically held canopy hatch for easy battery access and receiver access
• For intermediate to advanced pilots who want a great flying, good-looking EDF jet

Specs:
Type: H-King FLYCAT V2 70mm 12-Blade 6S EDF Jet w/Retracts
Wingspan: 1042mm
Build: Plug-N-Fly w/motor, ESC, servos, and retracts pre-installed
Fuselage Length: 1115mm
EDF Unit: 12-Blade 70mm
Motor: 2860-2100KV brushless inrunner
ESC: Aerostar 80A RVS G2 w/reverse & BEC (XT90 connector)
Servos: 6 x 9g (metal-geared on the nosewheel)
Material: EPO foam
AUW: 2000~2100g
Channels: Ailerons, elevator, rudders, throttle, retracts, motor reverse (optional)
Battery: 6S (22.2V) 3000~4000mAh 30~60C LiPo (not supplied)

Required:
1 x 5CH or greater transmitter and receiver
1 x 3000~4000mAh 6S 30~60C LiPo Battery w/XT90 connector
1 x Suitable LiPo charger
Medium and slow setting CA or foam glue

Included:
1 x H-King FLYCAT V2 6S EDF Jet airframe
1 x 2860-2100KV brushless inrunner motor
1 x 12-blade EDF unit
1 x Aerostar 80A RVS G2 speed controller
6 x High-speed 9g servos
1 x Accessory pack
1 x Quick Set Up Guide

Please note: A copy of the assembly manual and the Quick Set Up Guide is under the "Manual/Files" tab.

Features

V2 Upgrades with Enhanced Power System & Twin Rudders	High-Efficiency 12-Blade EDF with 2100KV Motor & 80A ESC
The next-generation Flycat V2 boasts a redesigned power setup for increased thrust, along with twin rudders for superior yaw control during high-G maneuvers. Electronic retracts provide smooth operation and scale realism, making this 70mm EDF jet ideal for precision flying and aerobatics.	Equipped with a balanced 12-blade fan, 2860-2100KV inrunner motor, and Aerostar RVS G2 80A ESC, this power system delivers smooth, turbine-like thrust on 6S LiPo. Optimized airflow ensures quiet operation while maintaining explosive acceleration for dynamic EDF jet performance.
Magnetic Canopy Hatch for Quick Battery & Receiver Access	Designed for Intermediate to Advanced Pilots
The large, magnetically secured canopy allows tool-free access to the battery bay and receiver compartment, simplifying swaps between flights. The secure hold ensures no mid-flight shifts, while the spacious interior accommodates 6S 3000-4000mAh packs with ease.	With its responsive controls and stable delta-wing platform, the Flycat V2 offers an exhilarating yet manageable flying experience. Its sleek design and high-speed capabilities make it a standout in the 70mm EDF jet category, perfect for sport flying and scale maneuvers.