Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Turnigy AE-45A Brushless Regler

Turnigy AE-45A Brushless Regler

Now save Speichern 0,00 € 0,00 €

17,38 €
Ausverkauft!
Stock:
OUT OF STOCK
Gewicht:
62 g
SKU:
TAE-45A

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Ein Qualitäts SMT produziert ESC mit zuverlässigen Komponenten.
Die Turnigy AE-Serie sind auf neue leistungsstarke Mikroprozessor basiert.
Die neue CPU bedeutet ultraschnelle Sync Timing, schärfere Kehlenantwort, weniger Batteriebelastung und reduziert FET Wärmestau. Auch gibt es eine separate Spannungsregler-IC für den Mikroprozessor bietet gute Anti-Jamming-Fähigkeit.

Spezifikation:
Ausgang: Stetig 45A, 50A Burst bis zu 10 Sekunden.
Eingangsspannung: 2-6 Zellen-Lithium-Batterie oder 5-18 Zellen NiMH-Akku.
BEC: Linear 4A @ 5-6V
Steuersignalübertragung: Optisch gekoppeltes System.
Höchstgeschwindigkeit:
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000RPM
Größe: 60mm (L) * 26mm (W) * 11mm (H).
Gewicht: 43g.

Eigenschaften:
Hochleistungs-Mikroprozessor bringt mit allen Arten von Motoren die beste Kompatibilität und höchste Fahreffizienz.
Weit offenen Kühlkörper-Design die beste Wärmeableitung Effekt zu erhalten.
Verbesserte Normal, weich, sehr-Soft-Start-Modus, kompatibel mit Flugzeugen und Hubschrauber.
Glatt, linear, schnell und präzise Gasannahme.
Mehrere Schutzfunktionen: Niederspannungsabschaltung Schutz / Hitzeschutz / Drosselsignalverlust Schutz
Programmierbarer über den Sender
Mit Regelmodus für Hubschrauber

Programmierung Features:
Bremseinstellung (wir empfehlen die Verwendung von Bremse für nur Falten Requisiten-Anwendungen)
Batterietyp (Li-xx oder Ni-xx)
Niederspannungs-Cutoff-Einstellung
Werksstandardeinstellungen wiederherstellen
Timing-Einstellungen (zu erhöhen ESC Effizienz und Glätte)
Weiche Beschleunigung Start-ups (für empfindliche Getriebeanwendungen)
Niederspannungs-Cutoff-Typ (Leistungsreduzierung orirnmediate Abschaltung)

Werkseinstellungen:
Brake: off
Akku-Typ: Li-xx (Li-Ion oder Li-Po)
Niederspannungs-Cutoff-Schwelle: Weiche cut-off (2.6V)
Timing-Setup: Low
Weiche Beschleunigung Start Up: Normal
Niederspannungs-Cutoff-Typ: Medium

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    TAE-45A
  • Brand:
    Nein
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    62.00
  • Länge:
    195.00
  • Breite:
    15.00
  • Höhe
    75.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great ESC. Perfect replacement for a foamy WOT4 (as their stock one is horrible and gets too hot). This one stays stone cold. I've has a few of these now for myself and other club members and they've all been great, but be very careful as last one came with the supply wires soldered the wrong way round (i.e. black was and red was -)!
Luckily I spotted it and simply soldered on the connector to compensate but I could have easily just followed the colours and then we'd have had a lot of smoke!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought one of these to uprate my foam-e WOT 4. I kept losing all power (both to the motor and the servos). Luckily I was test flying at height so did not lose the plane as I had set it up for gentle left hand turns on power loss.
On investigation I checked the the plug connections and low and behold it was the worst bit of soldering I have ever seen, wire was a mess and the solder just blobbed on, the whole lot covered up by the heat shrink! Did not take me long to sort and the unit now fine. However, should not have had to do this - Hobbyking need to get quality control sorted out as not everyone has the capability to do this and can lead to expensive crashes.
Hence I would only give my unit ascore of 2 due to poor quality control (lousy soldering)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
prestazioni e erogazione perfette
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far so good with this beast
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I love nice soft start and 6V BEC on this ESC. i use it on my 450pro modded to 6S FBL heli.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
instalada en hk 450gt ccpm

con 7 grados de timing y

motor tunigy 450-500 h2223 4400kv

lipo turnigy 2200 funciona exelente

14 minutos vuelo no 3d
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very happy with that ESC in my my GoDiscover plane. very usefull brake function for folding props.

http://youtu.be/6RJVWyDMWYI

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is the perfect ESC for your 450 heli. Programming via transmitter is very easy. I set the low voltage cutoff threshold to "low" because when it comes to helis I prefer having a defective LiPo rather than a crashed heli ;-). Also set BEC output to 6V which was easily confirmable.
The ESC gets barely warm after 6.5 minutes of governor mode sports flight (FBL governor, not the ESCs own governor) and about 2.500 rpm head speed. As far as I can tell only the YEP can compete with this ESC.
Well done, Hobbyking!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Den neuen ESC, ohne Motor, an den Akku und Empfnger geklemmt, dann ein kurzer Blitz und Rauch steigt auf. Teil defekt. Die Elektronik mit einem anderen Regler verbunden und alles luft bestens.
HK gewhrt keine Garantie, da der Regler verndert wurde (angeltete Stecker). Da es fr den Kunden ja nicht mglich ist, den Regler ohne Akku und Empfnger zu testen ist man hier auf jeden Fall der Betrogene.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fantastic ESC to flash with BLHeli for use with multirotors. Im using these on a 900 size Y6 multi. Very smooth and soldering the programing header is super easy. Using large 40mm pancake motors and no sync issues
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.