New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

12V 4.5A UBEC 2-5S Lipoly (7.2-21V)

12V 4.5A UBEC 2-5S Lipoly (7.2-21V)

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$8.80
Status:
In Stock
SKU:
12V45AUBEC
WANT FREE SHIPPING? Click here to find out more!

This Small and lightweight UBEC features a High efficiency switch mode design providing better heat dissipation when compared to linear voltage regulators. The shielded PCB design and output EMF coil makes helps provide a stable and low noise voltage output. This UBEC also features built-in reverse polarity protection.

Specs:
Input: 7.2V-21V (2-5S Lipoly, 2-6S Li-Fe or 5-15S NiXX Battery Pack)  
Output: 12V/4.5A (Less than 50mV peak to peak voltage @ 2A)
Dimension: 55mm x 20mm x 11mm(LxWxH)
Weight: 11.7g (wires included)

  • SKU 12V45AUBEC
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 24.0000
  • Length 95.00
  • Width 15.00
  • Height 35.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good so far recommended

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Good so far recommended

I have mine in use for my gimbal with 4s battery. works as expected.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

I have mine in use for my gimbal with 4s battery. works as expected.

Aquecem um pouco mas são resistentes e fiáveis. Se se mantiverem afastados da linha de vídeo não introduzem ruído.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Aquecem um pouco mas são resistentes e fiáveis. Se se mantiverem afastados da linha de vídeo não introduzem ruído.

Does what it is supposed to do. Without problems. Maybe I have one thing to complain about: the shape of the PCB is not completely level on the bottom and top side (because there is a fat condensator soldered on the side), so the mounting on a flat surface etc. is looking overall a little crooked ;) But that's just a luxus problem I think.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does what it is supposed to do. Without problems. Maybe I have one thing to complain about: the shape of the PCB is not completely level on the bottom and top side (because there is a fat condensator soldered on the side), so the mounting on a flat surface etc. is looking overall a little crooked ;) But that's just a luxus problem I think.

Same result. Have a 3s lipo in, get 10 volts out. Not it is even worst and is not keeping a steady 10v anymore. Pretty pathetic IMO.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Same result. Have a 3s lipo in, get 10 volts out. Not it is even worst and is not keeping a steady 10v anymore. Pretty pathetic IMO.

Este producto no funciona como dice! la unica manera de conseguir los 12v es que el voltaje de entrada sea mayor a 12v abajo de 12 vamos a tener una perdida de 1v aproximadamente.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Este producto no funciona como dice! la unica manera de conseguir los 12v es que el voltaje de entrada sea mayor a 12v abajo de 12 vamos a tener una perdida de 1v aproximadamente.

Burned up in a couple hours drawing less than 1 amp. Got to hot to touch and dropped to .10 amps. I had it connected to power a 12V 400mw VTX and a couple of small LED strips.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Burned up in a couple hours drawing less than 1 amp. Got to hot to touch and dropped to .10 amps. I had it connected to power a 12V 400mw VTX and a couple of small LED strips.

Does what it says on the tin!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does what it says on the tin!

Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.
Says it's 12v output but I get 5v. Not good.

Rgulateur pour alimenter une nacelle Tarot T2D, fonctionne parfaitement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Rgulateur pour alimenter une nacelle Tarot T2D, fonctionne parfaitement.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
BEC w/o LC-Filter Download [146]
BEC with LC-Filter Download [146]
BEC w/o LC-Filter Download [146]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!