Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

2.4Ghz AV FPV Receiver (Kingduino Compatible)

2.4Ghz AV FPV Receiver (Kingduino Compatible)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
12 g
SKU:
381000020
Product
Description

This module is a 2.4Ghz band micro-power radio communications receiver, generally used to transfer audio and / or video in Arduino applications.

Designed around a low-power integrated VCO, PLL and a broadband FM video demodulator using a FM sound carrier frequency. This module complies with CE - FCC leakage requirements.

The applications for this module are vast and only limited by your imagination. This unit can also be used as a great low cost 2.4ghz Micro FPV solution.


Features:
2.4Ghz wideband FM A/V receiver
Small footprint

Specs:
Low power consumption: 110mA
Operating voltage: 3.7-5v
Receiver Sensitivity: -90dBm

Channels: 2414, 2432, 2450, 2468
Dimensions: 36 x 23.5 x 6mm

*Note: This is not an original Arduino brand product.

Product
Specifications

Additional Information

  • SKU:
    381000020
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    12.00
  • Length:
    38.00
  • Width:
    6.00
  • Height
    8.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Just did a quick ground test integrated in a home made yagi (see pic "VRx_yagi" in files). Used the PRODUCT ID: 381000021 as VTx (stock antenna on the Tx). Pre-set (soldered) channels matched and I had a nice, clear picture. The range seem to be better than with my usual 5.9GHz 600mW Immersion RC VTx/VRx combo. Didn't test sound channel(s), but very pleased.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Set, Bitte nur darauf achten ob am Kamerastecker Plus(Rot) und Videoausgang(Wei) vertauscht sind, (war bei mir so), ist auf der Platine mit ,-,Vout angeschrieben. Die Plastikbuchse kann an der Kamera von den Steckkontakten gezogen werden und einfach andersherum wieder aufgesteckt werden.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
RTC6711 and RTC6721 based receiver, 2414, 2432, 2450, 2468MHz fixed frequency or can be tuned using SPI. Excellent device for small money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice little receiver.
does work with Airwave and Lawmate 2,4GHz channels.
picture quality is good, so i cannot confirm the other bad review.
I will test the range and give feedback, but that will take some time, since flying season is over here.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Doesn't interfere with 2.4 Ghz radio, that is a plus, range is dependent on the TX i am using it with 200mW, so limited range suits my application though
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
disappointing in every way ,don't buy this receiver spend a $ more for a good system .

This is toy quality .
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.