2213N 800Kv Brushless motor
Max Amp: 9.5ARPM/Min: 7250Thrust: 690g
Max Amp: 8.1A
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
These are fantastic motors and you can use them on almost every application! From motors for beginner/fpv planes to 250 ~ 350 sized multi-rotors! There build quality is good but there may be some occasionally that have faulty e clips or bearings. Otherwise, I highly recommend them...bought 3 of them. 2 were great but 1 was a bit off. The bearings were not done up correctly and I could lift it. It worked fine though. Other than that, great motor for the price. Use it for making multirotors.These are great little low Kv motors. They produce good power for there weight. Excellent for a budget multicopter!Great motor, E-Prop 11x5 do the job greatNice motor for a quadrocopter.
It can be mounted very steadily on a frame.Habe vier Stck davon an meinen Quadrokopter. Mit einem 9X4,7 Propeller und einen 3S 2200mAh Akku hab ich eine Flugzeit von etwa 10 Minuten. Werde demnchst mal 10X4,7 Probs probieren, das ist wohl die bessere Combo. Fr den Preis ein super Motor! Nur die Befestigungsplatte ist schnell mal verborgen. Hab die Dinger einfach mit Kabelbinder befestigt.good motors but I get one of four with slightly bent axel. I have to order one more! :-(Take this Motor for Multirotor and you will have fun with it!
I have build 3 tricopters and 4 Quadrocopters with them and NEVER a Motor makes a Problem! The Tricopters was flown with Turnigy Plush 18A and a 3s 2200 mAh on 9x4,7 and that was the best configuration ever! Flight time up to 13min with a Gopro on Board.I like this motor. 450 gr profile extra plane. 1500 mah lipo battery. 11*4.7 prop. Works perfect.
Simple, strong and cheap.I Recommended it.These are very nice running motors ,i have 4 motors on my hk x 525v3 frame .
And 10 minutes off flight time with 3000mah zippy 3s lipo .
The quad weights 1,6 kilogram with the gopro hero3 mounted.
Quite heavy but very controlable with the kk2.0 lcd flightboard.
Using apc 10X4,7 slowfly props,and rc timer 18 amps esc with simon k software.
Motors dont get hot at all and are running very smooth.
Really great value for the money payd.