TIG 425mm Z-Weave carbon blades are ultra stiff and much stronger than standard carbon blades.
Z-Weave blades can be identified by the unique carbon fibre pattern as shown in the image.
Weight: 58g each
These are great!!! Maybe for me a little to much pop or it takes some getting used to. My blades were straight and hard. Weight was with in 0.5 grams of each other and very little balancing. They DO have a few scuffs an scrathes but for this price who cares. Root thichness is 10mm and fit perfect on my HK500 flybarless.First i need to say that i do like hobbyking and its great service. But these blades are really waste of money and the finish is realy ugly. I needed to put 2 grams of tape to make cf the same and thats not good!These blades turned up scratched, scuffed and dented. Theylook like a bag of smashed a** holes. Hobbyking customer service don't want to know about it. I wouldn't reccomend this product.Ich bin sehr zufrieden mit den Z-Weave !
ich fliege die auf dem HK 500 und auf den Assault 700 DFC
Gru Ralftrs bonne pales ne pas oublier de les quilibr un peu lger au dpart super sur flybarlesse on peu mme monter un 13 dent sur un 500 HKI bought a set of these blades. Thumbs down, guys! The small area of the blade that comes in contact with the blade grips does not enable me to achieve the correct degree of friction required. These blades are floppy loose no matter how hard I tighten the blade bolts.
Also, the shims are too thick to help my Align T-rex 500 blade grips to grip the blades. I'm sorry I bought them and will sell them for a song in the San Francisco Bay Area....In last 2 years I bought 4 sets. First 2 sets were good, last 2 in 2012 are not so good. Different shape of the tip, different COG (1cm) , weight difference 0.5g,different shape of the trailing edge.
We should shop for "High Quality Carbon Fiber Main Blades" and call these "average quality". Not suitable for 3D. On high pitch they wobble and flex more then before.
Will not buy any more of these.Was looking forwards to flying these, but they arrived warped, and only good for stirring paint. I guess they are seconds from the factory...avoid.Blades look fantastic, are very very strong and didnt require much balancing, but after multiple spool ups and hovers, my blades were tracking out as much as 20mm. even at -/ 0 pitch. after going over the head setting pitch again and again blades still wouldnt track even close. I removed blades and one of them has been produced with a slight kink in it, meaning when blade is flat it will rock from end to end. bend is about 3mm. So blades are useless for flight and can only go on my used parts shelf. lack of quality control HK.My blades are a very big disappointment.
The finish and looks are very nice and clean, but the QA on the COG and balance is a disgrace just like my TIG 325mm Carbon Fiber Blades. The COG was out so much that when it came time to balancing them I had to use over 1mt of scotch tape. Either TIG has recently dropped the ball on the QA of their blade manufacturing or Im just unlucky.
Comes with CF shims which was cool.
Yet to fly them in this condition and doubt that I will.