6 LED Strip RED
6 LED Strip RED
Copy and Share the Below URL
6 LED Strip RED
Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR
-
SKU 6LED-RE
-
Brand HobbyKing
-
Capacity (mAh) -
-
Shipping Weight 29.0000
-
Packaging Length 95.00
-
Packaging Width 11.00
-
Packaging Height 70.00
VOLTAGE: 8,4 Vdc (2 LiPo's)
There are 3 resistors on the back meaning the led' are connected in series 2 and 2 and 2. Each red led needs 2,5 volt to emit light. When in series of 2, then 5 volts. The resistors all read 161. -meaning 16 and one '0' in the end = 160 ohm. The current in a led is 20 mA=0,02A. 160ohm x 0,02A=3,2V = the resistor 'eats" 3,2 volts.
3,2v for the resistor 5v for the led's is 8,2volts in total. A 2s LiPo is therefore perfect for the job. Putting in more voltage than that will only make them hot and last shorter/burn out faster.
VOLTAGE: 8,4 Vdc (2 LiPo's)
There are 3 resistors on the back meaning the led' are connected in series 2 and 2 and 2. Each red led needs 2,5 volt to emit light. When in series of 2, then 5 volts. The resistors all read 161. -meaning 16 and one '0' in the end = 160 ohm. The current in a led is 20 mA=0,02A. 160ohm x 0,02A=3,2V = the resistor 'eats" 3,2 volts.
3,2v for the resistor 5v for the led's is 8,2volts in total. A 2s LiPo is therefore perfect for the job. Putting in more voltage than that will only make them hot and last shorter/burn out faster.
I'm running 6 of these 6 led strips off my pdb on 3s zmr 250, nice and bright, there perfect. Tho I burned up a strip the backs are an open circuit board and can short out. Ordering 4 red for the back of my 250 quad. Again 3s lipo off the battery works fine, I cut off the connectors and solder them in. The quality could be a bit better, when you bend the strip sometimes lights go off, also can short out if comes in contact with metal or carbon fiber.
I'm running 6 of these 6 led strips off my pdb on 3s zmr 250, nice and bright, there perfect. Tho I burned up a strip the backs are an open circuit board and can short out. Ordering 4 red for the back of my 250 quad. Again 3s lipo off the battery works fine, I cut off the connectors and solder them in. The quality could be a bit better, when you bend the strip sometimes lights go off, also can short out if comes in contact with metal or carbon fiber.
Nice lights works great :)
Nice lights works great :)
Excelente opcin para ver la orientacin de tu quad en la noche (Uso sugerido) se monta en los brazos y entonces ya sabes hacia que lugar ve el quad, la luz roja que da no es tan fuerte pero es perfectamente visible desde tierra
Excelente opcin para ver la orientacin de tu quad en la noche (Uso sugerido) se monta en los brazos y entonces ya sabes hacia que lugar ve el quad, la luz roja que da no es tan fuerte pero es perfectamente visible desde tierra
Waouh bright, a clear. Real good product.
Waouh bright, a clear. Real good product.
bought this to make some fake afterburners. im happy so far
bought this to make some fake afterburners. im happy so far
Muy buen producto, los leds iluminan bien, sobre todo con 2s, y a un precio muy bueno.
Cinco estrellas para hobbyking.
:)
Muy buen producto, los leds iluminan bien, sobre todo con 2s, y a un precio muy bueno.
Cinco estrellas para hobbyking.
:)
I use them on my multikopter, works best on 5-6V.
I use them on my multikopter, works best on 5-6V.
I use this with a 6.0V out and they are very bright.
I use this with a 6.0V out and they are very bright.
Otimo produto. Recomendo a compra.
Otimo produto. Recomendo a compra.
Others Also Bought
-
6 LED Strip GREENSKU: 6LED-GR
$2.02 -
6 LED Strip WhiteSKU: 6LED-WH
$2.02 -
6 LED Strip BlueSKU: 6LED-BL
$2.02 -
12 LED Cluster - WHITESKU: 12LED-WH
$3.65 -
4LED Strip - REDSKU: 4LED-RE
$1.71
Related Products
-
3 LED Strip RedSKU: 3LED-RE
$1.71 -
6 LED Strip BlueSKU: 6LED-BL
$2.02
-
4LED Strip - REDSKU: 4LED-RE
$1.71
-
3 LED Strip BLUESKU: 3LED-BL
$1.71 -
3 LED Strip WhiteSKU: 3LED-WH
$1.71 -
4LED Strip - GREENSKU: 4LED-GR
$1.71 -
4LED Strip - WHITESKU: 4LED-WH
$1.71