Country
United States
 
Shipped From:
  • Global

ADS300 Water-cooled Brushless Outrunner 3000kv 300w

ADS300 Water-cooled Brushless Ou...

ADS300 Water-cooled Brushless Outrunner 3000kv 300w

Motor Size: 400 Class
Speed: 3000rpm/v
ESC Required: 30A
Voltage Range: 7.2v~11.1v (2s~3s Lipoly)
No Load Curr: 1.1A
Max Load: 24A

Dimensions: 23....
ADS300

Now save save $0.00 $0

$20.90
57g
ADS300


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

ADS300 Water-cooled Brushless Outrunner 3000kv 300w

Motor Size: 400 Class
Speed: 3000rpm/v
ESC Required: 30A
Voltage Range: 7.2v~11.1v (2s~3s Lipoly)
No Load Curr: 1.1A
Max Load: 24A

Dimensions: 23.8 x 45
Front Mounting Hole Distance: 16 & 18mm
Front Mount Thread Size: M2.5
Shaft Diameter: 3mm
Shaft Length: 14mm
Weight: 43g

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Diameter X(Inch)
    No
  • Torque(kg)(min. 0.01kg)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    ADS300
  • Weight(g)
    57.00
  • Length:
    65.00
  • Width:
    30.00
  • Height
    50.00
  • Kv(rpm/v)
    3000.00
  • Max Currents (A):
    24.00
  • Power (W):
    300.00
  • Length B (mm)
    29.00
  • Can Length D(mm)
    17.00
  • Max Voltage(V):
    11.00
  • Shaft A(mm):
    3.00
  • Unit Weight (g)
    43
  • Diameter C(mm)
    24.00
  • Total Length E(mm):
    45.00
  • Resistance (mh):
    0.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Schlechte Verarbeitungsqualität, 2 von 3 Motoren haben einen zu geringen Wasserdurchfluss, die Wellendichtung ist ebenso undicht, dadurch Überhitzung vorprogrammiert.
Used this motor to give a little more life to a Proboat Impulse 17. The motor works flawlessly with a 30a bec on both 2s and 3s batteries. Boat glides and cuts through water like butter. Motor does feel delicate and like others have noted, I did tighten the water pickups, by hand only. Very pleased with this product.
Nice little motors, although running them on 3S with 35mm speed props burned one within a minute, taking the ESC as well. Running them on 2S never caused any problems, so I ordered a new one for my dual prop setup modified NQD High Wind (converted completely with HK stuff)



I will run this boat on 2S only from now on, it is lively enough like that and less risk of toasting another motor.



One star deduction for burning on 3S.
have buy this little thing & i use on my homemade 430 wiesel
2s 1000mah

prop.:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13205

esc:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6460


here is the video: http://www.youtube.com/watch?v=9WdNKa6ai88
nice motor, solid torque, inlet screws are VERY poorly threaded, careful.
I bought this motor and burn the small wire with 3s 20c lipo and 28mm prop at first try. I dont recommend it seriously unless they improve the wiring size of this motor.
Nice motor. Just do not use any tool to tight the inlet and outlet fittings:

they're very delicate and can break. Tight using your fingers only.
ADS330 Outrunner:

Habe den Motor im Graupner Mini-Sprint montiert- super Motor.

Fahre das Boot mit Turnigy 3S 1600 30C mit Graupner K29. Zuviel Power

fr dieses kleine Boot. Hier die gemessenen Daten:

11.6 Volt

17 A

29000 UpM

Der Motor wurde bei dieser Belastung in 5 Minuten nur handwarm -

30 Grad.

Werde mehrere von dieser Serie kaufen.
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.