Total Price

$0.00

Cart 0 Cart 0 Loading...

AHF-50 .50 Size Nitro 3D Helicopter Kit

Generating Links

AHF-50 .50 Size Nitro 3D Helicopter Kit

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
Aeolus-GF
want FREE shipping? Click here to find out more!
SALE PRICE $99 no back orders, get em while they last.
 
An amazing quality kit, with excellent features and an advance design.
The Aeolus is a Nitro .50 size gas helicopter that will push the limits of your sport and 3D flying abilities.
Featuring single-axle CCPM input control system is one of the most effective designs at minimizing control interaction and reducing wear and tear on the servos.
Building this kit is fun and easy, the quality fitting components and hardware make it a joy to build and taking you no more than one evening to be flight ready. 
The engine mount is a practical, modular design and made for speedy installation and service. With a pop of throttle linkage, fuel feed line and fourteen screws the engine and clutch assembly separate from the airframe. There is no need to remove any base plate or the landing gear.

The AHF-50's quality is equal to that of any Japanese or European brand. Plastics moulding and alloy machining are all within tight tollerances.
Even the fussiest of die-hard expensive helicopter pilots will be unable to fault the quality and design of this machine.
Be ready to dent ego's and put some noses out of place with the well priced but superb quality
AHF-50 at your next club meeting!
Type.
Type: .50 size glow powered 3D Pro Helicopter
Control System: 120° CCPM
Rotor Blade Length: 600mm
 
Key Features.
The Advanced engine mounting design allows easy engine removal and more efficient power transmission.
The highest power to weight ratio available with a minimal takeoff weight as 3kg and it's huge pitch stroke, which is 13 degree both plus and minus, gives you most outstanding 3D explosive strength.
Clutches with a single-direction bearing are fixed by double bearings.This improves the precision and efficiency of power transmission, and reduces the vibration.
The rudder rod is constructed of light fiber thereby reducing distortion in the transmission and allows for very acurate tail rotor control.
A 420CC gasoline tank completes the perfect combination of furious flying and steady performance.
52 high-precision bearings guarantee excellent performance.
For a more reliable power transmission, the single-direction bearing in rotary table of the principle axis is well protected by vertical double bearings.
Product Spec.
Length: 1335mm
Height: 408mm
Width: 208mm
Gear ratio: 8.5:1:4.5
Main rotor diameter: 1348mm
Tail rotor diameter: 263mm
Flying weight: Approx 3000g
 
 
Required items.
Nitro engine (.50)
Servos (standard size)
Radio Gear : Gyro/Rx
Rx Battery : (UBEC with 2 Cell Lipoly)
600mm Blades with 12/4mm root
Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

MattAUSA | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 06, 2013

This is one of the best kits i have put together. Parts are good quality and fit together well. If only the 90 size was available. Will be getting another one for parts, such a shame HK doesnt stock spares. Otherwise its an awesome kit.

Dulpyps | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 06, 2013

This heli goes together fairly quickly. I particularly don't like the plastic used for the fan shroud, I broke a corner while attempting to put the two halves together. I've temporarily fixed by placing some CA in between the two broken pieces. Plan on apply a little fiberglass on the outside & maybe the inside if there's space. Everything else is great. Still need to get my Heli pipe, Gyro, Governor, blades & flight/receiver battery. I'm going HV on this I'm using Hitec HS-430BH all the way around. Might change out later after seeing how they perform. I can wait to get this bird finished & in the air. Come on warm weather & electronics needed.

Paul | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 21, 2013

For all thos wanting spares, buy another kit for the price, seriously, why wouldnt you? excellent quality for the bucks, happy flying all & thanks HK, really, what would we do without you? ;-)

Dulpyps | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 04, 2013

Package came fairly quickly. Everything was packaged well, I was expecting the canopy to be damaged like with so many kits. I was fooled, the canopy was well wrapped and protected. The other parts too looked good, everything bagged based on the step they're assembled in & labeled. I'm impressed once again HK. The only thing that wasn't right was that the anerobics retainer & loctite were dried up. That 's no biggy because I keep these on hand. I'll post another review once I get to do the build. Thanks again HK for reasonable prices and quality product.

theshewee | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 28, 2012

not flown yet but has been a really nice kit to build.. they seem to have thought of most things and even has a few spares

aditya2226 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 08, 2012

hii guys can i change this heli to gas engine becoze in india nitro fuel costs more and cant find it more so can any one help me what gas engine should be used for this heli

Leonardo | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 28, 2012

Otimo heli. Tenho um, voando faz 1 ano, motor asp 46, (voava 25 min com 1 tanque) depois fiz um upgrade (motor asp 52 aberto com camisa e pistao do asp 61 e cabeote do 46 trabalhado) t dando .59 cu.in na real... mas com taxa comp elevada (fiz camera hemisferica no motor). escapamento curtiss youngblood, pas turnigy, servos ds 610 e 620 na cauda. o kit era tao barato q no inicio tava com medo de ser ruim, mas depois q aprendi a voar bem, resolvi fazer o up grade de motor e mufla. mesmo assim, com motor 46 para voo escala e sport excelente. alem da resistencia.. qdo tava aprendendo ainda, ca com ele, e caiu forte. quebrou as pas, pas de cauda, mas nao empenou eixo (bem grosso). ah, tb coloquei tail boom de fibra de carbono... e o cabeote principal e caixa de cauda do HK 600 GT.. a main gear, correia, caixa de cauda, tail boom, muita coisa do HK serve... agora vou pass - lo para ps de 690mm... alongando o tail boom, colocando a correia do JS 90... excelente heli... motor asp um relogio suio.

Robert | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Apr 06, 2012

You will not be disappointed. The quality is awesome, All the parts fit nice and tight with no play. The kit is built in iso 9001 factory to a very high spec. I did use Align servos didn't want to have servo
Problems
due to torque and speed required.

WTWUK | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 28, 2011

Superb kit with a lot of Trex/HK-GT600 parts interchangeability. Will be producing a full parts commonality list shortly.

JEOMAN | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 25, 2011

Otimo heli, um otimo custo beneficio pra quem ta afim de iniciar nos glow, a montagem super facil com o heli todo modular, frame em fibra de vidro mas altamente resistente e de otima qualidade todo os heli. garanto a compra.

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
No File Name Download [1616]
No File Name Download [1218]
voando nas montanhas, afonso claudio-ES Download [233]
nervoso, mas controlavel!!! Download [273]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!