-
Product
Description -
The BMS-2514 is a High Voltage (7.4V) Coreless Digital Servo featuring Titanium gears and an Alu heat sink case. The BMS-2514 includes a heavy duty servo horn set.
Specification:
Weight: 69 grams
Dimensions: 40.5 x 20 x 39 mm
Torque @ 6V: 27.1 kg/cm
Torque @ 7.4V: 33.2 kg/cm
Speed @ 6V: 0.16sec / 60 deg at no load
Speed @ 7.4V: 0.13sec / 60 deg at no load
Features:
Alu Heat Sink Case
Titanium Gear
Coreless Motor
Digital Servo
Dual Ball Bearing
JR style connector
Compatible with 2s Lipoly (7.4v), 6 cell Nimh & 2 cell A123 (6.6v).
The The BMS-2514 is High performance servo manufactured in Taiwan and recommended for all applications. -
Product
Specifications -
Additional Information
-
SKU:
BMS-2514
-
Brand:
N/A
-
Shipping Weight(g)
160.00
-
Length
66.00
-
Width:
11.00
-
Height:
33.00
-
Speed (Sec/60deg)
0.13
-
Torque(kg)(min. 0.01kg)
33.20
-
Unit Weight (g):
71
-
A(mm):
43.00
-
B(mm)
40.00
-
C(mm)
38.00
-
D(mm):
20.00
-
E(mm):
54.00
-
F(mm)
28.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.This servo are dead after 6 onths on my little axial scx10.
Pinion hs...not good quality like savor..
.
servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones
montado en mi Gmade R1Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.
I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.It's a very strong and accurate servo.
I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.
I'm very happy with this servo! -
Upload
Videos -
Upload
Files
- acc