Dimension: 23mm x 24mm
Weight: 25.5g 0.89oz (kv1550) (not including connectors)
Diameter of shaft: 3.0mm(EDF/EDP)
Length of front shaft: 8mm
Prop: 8040 (GWS)
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Perfect little motor for my 250g 3D GeeBee. Hope it will bee soon in stock again.Great little motor at a good price.piccolo e potente, un po' rumoroso nel funzionamento ma tutto sommato ok.
il supporto motore in legnoI use this motor on my 500gr mini-H quadcopter with 6 inch triblade props and it performs well.
6x4.5 TriBlade @ 3s: 8.5 amp - 375gr thrust
6x4.5 TriBlade @ 2s: 5.5 amp - 225gr thrust
a full review on several props (7x4, 6x4,...) can be read on my blog (wipo-minihcopter.blogspot.be)I use 4 of them on my 500gr CFK quadcopter on 10A Plush ESC. Use 6x4 props on 3S 1000mAh. Good choice! After Hours of flying no issues with bearings or temperature and a flight time of 8-11 Minutes.My C20-1550kv motor's package says this motor is from www.aeorc.com.
And I found some prop data.
Got this for the. Hk kinect mini glider tgat is now out of stock. It brought that little thing to life... Only thing that u have to do is reverse the shaft.. Very good motorvon der Groesse passt der Motor in den Merlin von Multiplex. Die Achse kann man umdrehen (Madenschraube vorher loesen)Great replacement motor for the kinetic 800/ merlin. All you need to do is take out the shaft and use the stock motor shaft to use it. This motor has better performance than stock. With a 2S lipo, now it is on par with the 3S performance before. On 3S lipo, it climbs like a rocket with a 2:1 thrust to weight ratio. It gets hot on 3S with the 8x4 prop, but its a glider so you wouldn't be pinning the throttle at the top that long anyways.Very nice little motors that can take a lot of abuse. Put these on my homemade foamies and crashed with them on a lot. Would suggest to getting a blue wonder style motor instead.