Carbon Fiber Landing Gear 160mm (1 Pair)
Super light weight.
Height: 160mm (the height from the centre of the wheel to the base of the fuselage.)
Width as shown in image: 30mm
Length as shown in image: 185mm
Price and excellent quality.
Recommend RecommendI'll install this carbon gear on my new acro; they're well made and light.
Bought for my Decathlon, but it crashed before receiving the gear :-(Have just received and fitted this carbon undercarriage to my fliton inspire 60 they are a lot lighter than the original legs that delaminated. I had to move the rx battery forward 4" as the c&g was affected by the weight loss .they looked very flimsy but are very strong they flex better than the original . they are fitted swept back and look fantastic on the plane . I had five flights with them today first test and passed with flying colours , I missed flying this plane due to the old legs now I need some nice weather to get her back in the air againGot tired of the alloy gear on my Airoso bending out of shape.
This carbon fiber landing gear will fit with a bit of modification
it is about 2mm to wide to fit the slot in the body, I sanded that off with a belt sander and used the alloy one for a drilling template.
The extra sweep should not matter as the wheels are still way in front of the CofG. I have not tested as of this post but all indications are good, the only problem, is maybe some nose overs landing on grass.perfetti per il F3A rainbow di HK. robusti e ben fatti. ConsigliatiI installed these on 50e Katana weighing 2.6kg, they looked great. Many good landings and I thought they are storng. Just one hard landing (not too hard) and they did the splits.. they flexed at the shoulder bend (Not visible) and now they are weak at that point. I guess the Carbon fibers have split inside... not joined, glued or mended together very well , I cannot use them I have to find something else.Excellent CF and it is 160mm and was perfect for KATANA 50e. Used Aluminium to joint the two legs together when mounting so they don't screw.Fits the mx2 perfectly, However I was a little disappointed that the under side has been made with insufficient resin , and also one leg has a join in the carbon fiber .. a high strenght item like this should be made with full pieces of carbon cloth not jig sawed scraps. For $29.00 I expected better quality.je vais l'utiliser sur un SYNERGY 160fx ZNline.. bien moin cher qu'un officiel ZN un peu trop fragile pour une utilisation quotidienneI bought this LG for my MX2. As you can see on my plane pictures, its dimensions correspond well. A matter which I had not planned because it is not visible on the description picture, it is that the wheels axis is moved forward of several centimeters. It is not a problem on my plane, on the contrary it's an advantage because that avoid the plane to fall over down on the prop during landing on bad grass landing track.
The adaptation is very easy, the LG seems to be robust.
On the other hand, contrary to other LG that I bought on Hobbyking, the finish of this one is not very good, but it's not a big problem given that it is easy to work the finish of a carbon part (sand slightly with a fine sandpaper, then apply one or several coats (layers) of varnish in spray).
Profil download now [396kb] Front download now [613kb] bottom download now [462kb] ON_HK-F3A_2 download now [414kb] ON_HK-F3A_3 download now [446kb] ON_HK-F3A_4 download now [552kb] ON_HK-F3A download now [445kb]