The Cellpro 10s supports up to 10A max charge rates and new faster Auto Charge rates (1.0C, 2.0C, and 3.0C), the 10s is capable of safely charging one or two lithium battery packs at up to a 3C charge rate
For Battery types: Lithium Polymer (1s to 10s balanced), Lithium Ion (1s to 10s balanced), Lithium Manganese (1s to 10s balanced), A123 (LiFePO4) (1s to 10s balanced)
Pack capacity: 100 mAh to 65Ah (charge time limited to max 12 hours)
Input voltage: 10-16VDC, reverse polarity protected
Input current: 1A to 25A, software limited, user adjustable using PC software
Power conversion: DC/DC converter, 62.5 kHz, 80% to 90% efficiency depending on output current
Nominal Output Voltage: 3.60, 4.10, and 4.20 volts per cell; 42V maximum
Output battery charge current: Adjustable range 100mA to 10A, or 100mA to 4A (node only charging), limited by 25A input current*
Continuous max output power: 180W @ +12VDC input, 260W @ +15.7VDC input
Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV
Current calibration:Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA
Voltage resolution: 0.1mV
Voltage tolerance: +/- 6mV
Charge current: +/- 1%
Capacity added to pack: +/- 1%
Percent capacity (“Fuel”): +/- 20%
Serial data output: 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity
Data integrity: Checksum, CRC checking
Cooling fans: Single, 8 CFM, 40mm diameter
Heat sink: aluminum case, finned
Output battery connector: “Cellpro” compatible, 2 x JST PA series, 6 position
LCD: 2 line, 16 character, light grey/blue backlit
NOTE: Balancing boards are sold sepperatly. Please see related products. Two adapter boards for your brand of battery will be required for 10s charging.
This is a brand new charger. Not a refurbished unit.
* Available charger current may be limited for certain battery types depending on the number of cells charging in series and also by the ambient and internal temperature of the charger during operation
5 out 5 all day long for the cellpro 10s HK,i've had the smaller cellpro 4s gold for a good few years now so i needed a bigger charger that could charge a bigger cell count,plus i wanted to charge lipo batteries in parallel so with the two ports i can charge multiple batteries at once now,with a couple of parallel charging boards i'm well and truly sorted,just remember that you will need a good PSU (power supply unit) that can handle the 260watts with a least 20amps.
I've also got and had other charges over the years but nothing IMO can come close to the Cellpro charges,i'd like to see HK selling the cellpro powerlabs 6 & powerlab 8 if possible because i know i'd buy one of those if the price was right too,revolectrix wants to much for shipping and HK can even cell there cellpro 10s cheaper than they can. ;-)Hobby king Ya just gotta do better then this. You say to look in the " related products" to get the balance board for this thing. I WANT to buy one but I'm NOT going to because I cannot find the balance board anywhere. There is NO related produces under the products tab. I need a charger that can balance 8s. This can do it but you don't make it easy to find the balance board I wonder how many other sales your losing because of this. Please make it easier for us to give you some money K? please? and thank you :)Great Charger! Especially for Lipos with older cells or bad cell matching! The cellpro 10s and all other fma products balance faster than all other brands. I have a Junsi 1010plus too, but the cellpro is much faster. And the option for loading over balance ports only is great! I use this very often! The only negativ thing i can say is that this charger is only for charging Lipo, LiFe and LiIon with no opions for dischargingbest liPo charger available.
no possibility to overload your batteries.
up to 313watts of charging power,
up to 2x 5s lipo batterys.
faster than any other charger,
charges if needed with up to 4Amps over Balancer Wire standalone
LiPo, LiFe, LiIon possible, nothing else!
Bought it almost two years ago from england for 200 Euro! if you can, buy it NOW!Hello Guys!
This Revolectrix Charger is the best Charger for Lipo or LiIon Life Batteries available at the market.
no one other is as accurate as it,
no one ist faster
and im using it now for more than one year.
i bought it for 200 Euro > now for 126US$ / 119$
i think you will not make anything wrong with the cellpro 10S
This FMA Cellpro 10s has the most powerful Balancer of all the chargers I know. It's an absolute must, at HK it's have price. You need also a power supply of at least 20 Amps to make things complete. Best Buy.un anno e mezzo che lo uso...acquistato da altro negozio...
veramente ben fatto...
facile da usare...(in automatico)
molto veloce nella carica...(in automatico)
gestibile da PC...
fatte le prime impostazione di base (una volta solo)si arrangia tutto lui...
non serve impostare ne voltaggio,amperaggio e altri valori vari...tutto automatico...
colleghi la lipo,premi il pulsante e basta....
penso proprio di acquistarne un'altro....il mio pagato molto di pi...
OK 100Type your review here.
Try to include as much data as possible.
excellent charger - I started with a 4S, and now have moved to the 10S as I started to use larger Lipo packs. A 5000 mah 6S Lipo charge time approx., 35 minutes. This FMA charger pays for itself by protecting your lipo's, and extending their life with safety features built in.I exclusively use FMA chargers for lipos, the Cellpro 10s has been serving me without any glitch since I purchased it. Hobbcity now just makes it a lot cheaper! I am tempted to get another one.