-
Product
Description -
Compatible with Futuba Fasst transmitters the Corona R14FA offers an affordable alternative for Futaba radio users.
Specs:
Operating Current:
70mA @ FASST 7ch mode normal and 110 mA max,
80mA @ FASST multi-channel mode normal and 110 mA max
Operating Voltage: 4.0 ~10V
Latency:
7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,
8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode
Sensitivity: ~ -96dBm
Fail Safe: Yes
Size: 53x37x16mm
Weight: 22g
Antenna length: 136mmCompatibility:
FUTABA FASST 2.4GHz transmitters
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG -
Product
Specifications -
Additional Information
-
SKU:
014000016
-
Brand:
Corona
-
Capacity (mAh)
N/A
-
Shipping Weight(g)
44.00
-
Length:
145.00
-
Width:
20.00
-
Height
100.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
3/9/2018
I have used at least of dozen of these over the last 4 years, in everything from large foamies to giant scale gas-powered aircraft, and have never had a range issue, nor any dropout issues at all. They have bound fine as FASST Multi with both my 14SG and 16SZ radios. The only things missing are the SBus and telemetry. The price vs. Futaba makes these a great alternative to the R7014SB.
HOWEVER, please be aware that in their present form THIS IS NOT A 14 channel receiver, it is a 12 channel receiver. Despite what Corona and HK may say, channels 13 and 14 DO NOT WORK, period. It has nothing to do with switches or programming, or anything else. There is a very clear Youtube video demonstrating this, just search for Corona R14FA. I have been in communications with Corona directly on this, and they have no answers. If they ever fix this, I would rate this product 5 stars across the board.
Bottom line is, it's not perfect, but what do you want for less than $30?I have 3 of these recievers and use them with a futaba 14sg on range test mode with antanae pointing away they do 50 meters easily which is further than some of my futaba recievers ,can somebody tell me how to get channels 13 and 14 to work with my radio and these recievers?Channels 13 and 14 work with my futaba 14 channel recievers but not these coronas so maybe I need to change something in settings?
THANK YOU HK FOR THIS AFFORDABLE ALTERNATIVE TO GENUINE RECIEVERS!
PS I HOPE CORONA BRINGS OUT AN 18 CHANNEL SOON !Excellent in my four and five metre gliders at extreme range. My transmitter is a Robbe Futaba FC-18 with a Futaba TM-8 2.4 ghz module installed. An excellent receiver which I recommend to all FASST users.Just bought my second one after using the first for two years in my 4metre scale ASH26 glider without any problems and this purchase will go into another large scale glider . It is bound to a Robbe Futaba FC18 with a TM8 module and works beautifully!good Corona R14FA 2.4Ghz Fasst Compatible ReciverEl mas alto de la gama
12 conectores en vertical y dos en horizontal.
Sin ningn problema , sistema FASST .
Buen producto a buen precioWorks flawless with futaba 10CG. I use it with planes and quads and hexacopter. Just bind, plug and fun. Nice product ! Will buy more.... I have not tested range...the equivalent Futaba one can give 2km strait line without problem..If you have a Return to home system in case of no-reception, there's no problem. If you fly behind an obstacle (happens sometimes while doing FPV), you may lose signal...so enable failsafe and RTH....I probably have close to 10 of these installed in models of various complexity. They pair and work flawlessly with my Futaba 8FG (a 14-channel TX). Phenomenal value and so far, knock on wood, I have not experienced a single failure or noticed any loss of signal events. For the price you can't beat this RX. It is a bit large but let's be honest, most planes that can take advantage of 10 channel setups aren't small anyway.I have 4 of those receiver 14FA, are good, i had been using for a year in my turbine jets, Works very fine, and never a trouble, i recommend it, i was thinking why Futaba asking too high prices for 14 cannel Rx, thanks HK for sell Corona alternatives in Receiver.
Note: I only recommend Receiver, never servos even micro servos, are terrible bad.Very impressive quality receiver at low price! Just buy it! -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesNo File Name download now [950kb] No File Name download now [180kb] a way to get RSSI for the R14FA RX (tran download now [974kb] A method to get RSSI from this RX (From download now [1039kb] Manual download now [145kb]
Sign in
Register
Sign in / Register
OR
or
Register
-
-
-
ACCESSORIES
- EDF Systems & Parts
- Wheels/Landing Gear/Retracts
- Spinner/Adapters
- Propellers
- Wires & Connectors
- Heat Shrink / Shrink Tube
- Flight Stabilization Systems
- Horn/Hinge/Clevis
- Screws, Bolts, Nuts and Fasteners
- Covering Film
- Decal Sheets
- Glues, Lubricants & Tape
- Night Flying Accessories
- Push Rods
- Tube, Rod, Carbon Fiber & Glass Fiber
- Pilots
-
-
-
TELEMETRY & FPV
-
-
-
-
-
POWER SYSTEMS
-
-
-
-
BOAT ACCESSORIES
-
-
-
POWER SYSTEMS
-
-
-
-
POWER SYSTEMS
-
-
-
-
DIY & ELECTRICAL ACCESSORIES
-
-
-
FPV, AERIAL VIDEO & TELEMETRY
-
-
Show Filters
All Categories
Product Finder
Settings
Useful links
-
-
-
ACCESSORIES
- EDF Systems & Parts
- Wheels/Landing Gear/Retracts
- Spinner/Adapters
- Propellers
- Wires & Connectors
- Heat Shrink / Shrink Tube
- Flight Stabilization Systems
- Horn/Hinge/Clevis
- Screws, Bolts, Nuts and Fasteners
- Covering Film
- Decal Sheets
- Glues, Lubricants & Tape
- Night Flying Accessories
- Push Rods
- Tube, Rod, Carbon Fiber & Glass Fiber
- Pilots
-
-
-
TELEMETRY & FPV
-
-
-
-
-
POWER SYSTEMS
-
-
-
-
BOAT ACCESSORIES
-
-
-
POWER SYSTEMS
-
-
-
-
POWER SYSTEMS
-
-
-
-
DIY & ELECTRICAL ACCESSORIES
-
-
-
FPV, AERIAL VIDEO & TELEMETRY
-
-
Cart is empty Make it look better :)
Total $0.00 0 item(s)
Product Finder
-
Lipo -
Motor -
Servo -
Propeller
Most relevant matches are shown. Click Search for more items
