Corona SB-3039 S.Bus Digital MG Servo 5.0kg / 0.14sec / 32g

Corona S.Bus digital servo's are up there with the best that are on the market today at a price that is very affordable, high resolution and accurate centering are just two of the many features they have.

Features:
• S.Bus compatible
• High resolution
• The tightest deadband
• Accurate positioning and centering
• Faster control response
• Quicker acceleration
• Constant torque throughout the servos travel
• Increased holding power when stationary
• High precision potentiometer

Specs:
Model: SB-3039
Voltage: 4.8/6v
Speed: 0.14/0.15sec 60°
Torque: 4.4/5.0kg.cm
Current Draw: 300/400mA
Dead Band Width: iÜ3usec
Travel: 40°/one side pulse travelling
Bearing: MR106
Gears: Metal
Motor: Coreless
Servo Wire length: 300mm
Operating Temp: -20/+60°C
Weight: 32g
Dimensions: 32.5 x 17 x 34.5mm
Spline count: 25

What is S.BUS?
Different from conventional radio control systems the
S.BUS system uses data communication to transmit control signals from a receiver to a servo, gyro, or other S.BUS compatible device. This data includes commands such as “move the channel 3 servo to 15
degrees, move the channel 5 servo to 30 degrees” to multiple devices. The S.BUS devices execute only those commands for their own set channel. For this reason, it can be used by connecting multiple servos to the same signal line.

[Operation by conventional radio control]
An S.BUS servo connected to a conventional receiver operates as a conventional servo.