D2826-10 1400kv Outrunner MotorSpecs:Rpm/V: 1400Shaft: 3.17mm
Voltage: 2S~3S (7.4v to 11.1v)Weight: 50gWatts: 205wMax Current: 21A
Suggested Prop: 7x4(3S) ~ 9x4.7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Great motor, have to use a 9x6 or 10x5 prop here in the mountains to get full use of the motors potential. One main bad thing is the prop adapter is really weak. If you have a belly grass lander, get a different adapter, even from the best of landings the prop adapter will eventually snap at its weak point at the end of the threading.For me they work flawlessly for 4 yrs.
use them on my 450 Quad & 550 Hexa both with 8x4.5 props
Good motor for a great price. Seems slightly anemic with the spec 7 x 4 prop, but I think it will prop up just fine.Low cost and powerful motor.Moteur peu onéreux et puissant.Bought this as a replacement for my burnt out Bixler motor and it's been great. Some minor balancing required for perfect FPV use but very happy.Great bearings, great balance. After several minutes of flying around 20A, it's just barely warm.great motor well builtPerfecto motor, 7 to 8' propsGreat motor, running it on 3s with a 8x4.5 prop on a 450mm quad. It has lots of thrust and so far has been great.
No File Name download now [1718kb] current measurements with 2S 2200mAh 30C download now [0kb] mar11 bx2 with ligths download now [1684kb] No File Name download now [1659kb] D2826 OutRunner Brushless Motor download now [369kb] Bixler 2 motor mount download now [1633kb] Bixler 2 Motor Mount download now [2180kb] Original box download now [57kb] My First quad download now [2273kb] Turnigy 2826-10 test by Paolo Macchi download now [184kb]