Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global

Turnigy D2830-11 1000kv Brushless Motor

Turnigy D2830-11 1000kv Brushless Motor

QTY:

Now save save $0.00 $0.00

$10.62
Rating:
Stock:
Weight:
83 g
SKU:
D2830-111000

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description
D2830-11 1000kv Brushless Motor
 
Specs:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S) 
Mounting Hole Bolt Circle: 16mm or 19mm
NOTE: This motor is 1000kv. The factory labelled them 1100kv in error.
Product
Specifications

Additional Information

  • SKU:
    D2830-111000
  • Brand:
    Turnigy
  • Weight(g)
    83.00
  • Length
    90.00
  • Width:
    35.00
  • Height:
    55.00
  • Kv(rpm/v)
    1000.00
  • Max Currents (A)
    21.00
  • Power (W):
    210.00
  • Length B (mm):
    30.00
  • Can Length D(mm)
    14.00
  • Max Voltage(V)
    15.00
  • Shaft A(mm):
    3.17
  • Unit Weight (g):
    52
  • Diameter C(mm)
    28.00
  • Total Length E(mm)
    45.00
  • Resistance (mh):
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

Overall
Value
Quality
I got this motor for a Multiplex EasyStar and it has been very good, more than enough power for the gentle flying that I am doing as a beginner. 3S 2200 lipo batteries give me about 40 minutes flying. Had to swop the motor shaft around to fit an EasyStar but as I have access to a machine workshop this was not too much of a problem for me, but would not be possible without machine shop access, don't think that because it shows a circlip and allen screw it can be taken apart and reversed. All said and done though it is a good motor and ideal for the Easystar.
Overall
Value
Quality
Quality
Overall
Value
Using this Turnigy 2830-11 1000kv in a 1,20m glider on a 4S Setup with a Aeronaut 8x6 Folding Prop. Performs really nice, gets a little hot on full throttle 4s / 8x6 so be careful about the cooling. Bearings are good and the qualitiy is good. I can recommend this motor!

Flightvideo:
https://www.youtube.com/watch?v=6wy99TRc4xc
Quality
Overall
Value
Quality
Value
Overall
I was looking at some old orders, and four years ago I purchased 5 of these motors. I built a quadcopter, and had a spare just in case.

While I have wrecked my quadcopter and rebuilt it numerous times, and have broken many props with its unplanned landings, these motors have held up well.

I usually fly with a 5000mAh 3S 30C battery and 9x4.7 props, which brings the all-up weight of my copter to 1210g. But it flies for 15minutes, too. I've been very happy with these motors.
Quality
Value
Overall
Quality
Value
Overall
......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Quality
Value
Overall
Quality
Value
Overall
Nice little motor. Works well, however burns easily. Be sure to turn throttle off if you suddenly crash.
Quality
Value
Overall
Quality
Value
Overall
Nice motor with plenty of power for any DTFB plane. Have crashed and they have survived well
Quality
Value
Overall
Quality
Value
Overall
You will never find a motor that betters these for value.

Smooth, Quiet and plenty of power on my 450 and 470mm Quads with 9045 Gemfan props and 3S 2200mah..

Way better than others I've used that cost 2-3 times as much.

Awesome motor Turnigy and great value HK...

Quality
Value
Overall
Quality
Value
Overall
I have added my own thrust bench measurements using 9x4.7 and 10x4.5 props (3S batt). It turns out that D2830 is a great motor indeed. Using 10x4.5 SF props, I got 420 grams of thrust at 50pcnt throttle with efficieny 7.5 g/W. Despite some claims that 10" props are too big for this motor on 3S, it is not true.
Quality
Value
Overall
Quality
Value
Overall
fits with this ESC https://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=49603
Quality
Value
Overall
Quality
Value
Overall
very good for the price, mostly used in small scratch build and doing the job great
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.