Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global

D50012MG High Speed Digital MG Servo 25T 5.4kg / 0.05sec / 56.7g

D50012MG High Speed Digital MG Servo 25T 5.4kg / 0.05sec / 56.7g

QTY:

Now save save $0.00 $0.00

$26.95
Rating:
Stock:
Weight:
85 g
SKU:
D50012MG

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description
Spec.
Torque: 4.2kg.cm at 4.8v / 5.5kg.com at 6.0v
Speed: 0.06sec/60deg 4.8v / 0.05sed/60deg 6.0v
Weight: 56.7g (.11oz)
Voltage: 4.8v~6.0v
Gear Type: Ti-Alloy
Motor Type: Coreless High performance
Bearing: Dual
Plug: JR type
Spline Count: 25
Product
Specifications

Additional Information

  • SKU:
    D50012MG
  • Brand:
    No
  • Weight(g)
    85.00
  • Length
    100.00
  • Width:
    20.00
  • Height:
    90.00
  • Speed (Sec/60deg)
    0.05
  • Torque(kg)(min. 0.01kg)
    5.40
  • Unit Weight (g):
    56.7
  • A(mm):
    43.00
  • B(mm)
    40.00
  • C(mm)
    41.00
  • D(mm):
    20.00
  • E(mm):
    57.00
  • F(mm)
    29.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I have 2 of these servos , they work great I have then on my sbach .45 , there very fast when I Let go of the stick I can't even see the servo go back to center, I using them on a rudder and elevator ...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow, i have to say: This is the first very good product of Hobbyking. Impressive speed, solid, lots of power. i can only recomend this one... even though it is quite pricey if you compare to other brands....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've been using the servo on the tail of my Century Hawk Pro .32 nitro heli. It's a fantastic servo. I had been using an HK401 gyro until to day when the gyro failed. I'm trying a new gyro now, but so far I can't find any fault with the servo at all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Been using this on the tail on my 550 for some time. Very fast and seems very well made. Does not get hot while using. Also impressed how strong it is, pulled the carbon push-rod apart twice at the joint due to a jammed guide. Servo still works flawlessly.
Very happy with the servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Use this servo for Velocity 50 in throttle and tail, use with GY611 that using 1520 pulse (service menu set), servo is very fast and strong but get hot after hard maneuver on tail, very good servo for it's price but don't work too hard on tail,,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
An addition to my review from this servo:
colour is different, it comes fully black! no red in it and the case is fully plastic. Its one of the fastest servo ive seen, uses a lot of currency.
Servo DS 8418 Digital Ultra-S from Graupner has the same speed, but doesnt burn currency, but its more than the double of the price (60$).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Oh my god! This servo is super super super fast!!!! Using it for my 1:8 Serpent with a 6.6V Lipo to the receiver and futaba receiver. Whatch out!!! This servo used a lot of currency!!! So take a receiver Lipo with enoufh mAh, 700mAh is too little, i tried it and doesnt work for long. Minimum take a 1200mAh Lipo, 6.6V, set your receiver to digital servo mode and you will have the fastest servo plus it is really precice!! i only can recomend it, it is much better than the savox and futaba ones ;-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This thing is ridiculously fast. I'm using it as a tail servo for my .30 size Century Hawk Pro nitro helicopter. Running on an HK401 gyro, it was super easy to set up and the servo is incredibly fast. I have no problems keeping the tail locked in and the gain is much lower than I used to have to use. Great servo for the money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a high quality servo from Blue Arrow (the same manufacturer of Mi Servos). I have bought 3 of these for my 600 EFL frame to use them as cyclic servos. They are great, very powerful and smooth but the grease inside is insufficient. Re-grease and enjoy :) Time will tell how durable they are.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
wow. insane fast on buggy steering in 2WD. Power is very good (more than the servo saver can link). almost no gear play, very smooth working.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.