This DIY Transmitter module integrates four RF chips (CC2500, NRF24L01, A7105, CYRF6936) into one easy to use circuit board. There are lots of remote control transmitters in the market that can utilize this module and allow you to remotely control a number of RC products.
The protocols used are Futaba S-FHSS, Walkera DEVO, Spektrum DSM2, DSMX, Flysky, Frsky, WLToys, Hubsan, Hisky, Esky, Assan etc. Using your favorite controller you will be able to easily control the device of your choice such as multi-rotors, drones, helicopters and aeroplanes.
Just insert this module into a compatible transmitter such as Turnigy 9XR, 9XR Pro, Frsky X9D/X9D Plus/X12S, flysky TH9X, Futaba S-FHSS transmitter or other transmitters that can use the Open TX firmware.
• Works with 2.4GHz Radios
• Compatible with Turnigy 9XR, 9XR Pro, Frsky X9D/X9D Plus/X12S, flysky TH9X, Futaba S-FHSS transmitter
• Easy to use
Operating voltage: 5-14V
Operating current: <=100mA
Operating frequency: 2.4GHz ISM band
RF power: +22dBm
Case: not included
Size: 55x41x7mm, button not include
Dial Protocol Sub_protocol Auto Bind Option RF Chip 0 Reserved - 1 FLYSKY FLYSKY No 0 A7105 2 HUBSAN Yes 0 A7105 3 FRSKYD No -10 CC2500 4 HISKY Hisky No 0 NRF24L01+ 5 V2X2 No 0 NRF24L01+ 6 DSM2 DSM2_22 No 6 CYRF6936 7 DEVO No 0 CYRF6936 8 YD717 YD717 No 0 NRF24L01+ 9 KN No 0 NRF24L01+ A SYMAX SYMAX No 0 NRF24L01+ B SLT No 0 NRF24L01+ C CX10 BLUE No 0 NRF24L01+ D S-FHSS Yes 10 CC2500 E BAYANG No 0 NRF24L01+ F MJXQ E010 Yes 0 NRF24L01+
I updated the multimodule with a new software and then I tied all the flysky and A2 receivers. Binding and function were impeccableI have mod the Hobby King Usbasp programmer by discnnecting the mini jumper on board cutting off 5v to atmega chip but use a wire jumper from programer vcc to tx module vcc header without over power the cpu voltage. It works like champ.https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases
Latest firmware update patch is available. Love it. Great as it works on most RC protocol.