New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy DIY 6 Position Switch for Turnigy 9X/9XR/9XR Pro

Turnigy DIY 6 Position Switch for Turnigy 9X/9XR/9XR Pro

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000869-0
WANT FREE SHIPPING? Click here to find out more!

Another excellent upgrade to add more functionality to your Turnigy 9X, 9XR and 9XR Pro. Use this kit to add a 6 position rotary dial to your transmitter. 

For those using a drone with ArduPilot this is an ideal solution to replace hard to remember 2/3 position switch combinations. Using this 6 position rotary knob switch will make changing flight modes so much easier.

Just replace one of your unused rotary knobs with this six position knob. 

An ideal solution multiple flight modes and for camera ship drone flying.

Features:
• No more hard to remember 2/3 position switch combinations with complex tx mixing
• Easy to use six position rotary knob
• Compatible with Turnigy 9XR, Turnigy 9XR Pro and Turnigy 9X
• ArduPilot systems

Includes:
1 x 6 Position switch assembly
1 x 1.5mm Allen (hex) key
1 x Instructions

Requires:
Soldering Iron
Solder
Some basic tools (tweezers, pliers, screwdriver)

Note: This mode switch can ONLY be used to replace a continuous knob on your TX. It cannot be used instead of a 2-way or 3-way switch.

  • SKU 9171000869-0
  • Brand Turnigy
  • Capacity (mAh) -
  • Shipping Weight 19.0000
  • Packaging Length 160.00
  • Packaging Width 19.00
  • Packaging Height 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

After reading the reviews I decided to give it a try. It DID work for me with a little mechanical intuition, but the other reviewers are correct, the shaft difference does make for a challenging conclusion. However, the soldering went well and the switch makes it a lot easier to utilize the different flight modes. Don't expect it to be perfect - the old knob certainly looks better on the 9XR and of course only fits the brass collar. Just be sure you get the set-screw to seat nicely on the flat part of the shaft. I took a dremel tool to the shaft as it was a little too long for my liking - it made the old knob stick up higher than the rest. Again, it worked for me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After reading the reviews I decided to give it a try. It DID work for me with a little mechanical intuition, but the other reviewers are correct, the shaft difference does make for a challenging conclusion. However, the soldering went well and the switch makes it a lot easier to utilize the different flight modes. Don't expect it to be perfect - the old knob certainly looks better on the 9XR and of course only fits the brass collar. Just be sure you get the set-screw to seat nicely on the flat part of the shaft. I took a dremel tool to the shaft as it was a little too long for my liking - it made the old knob stick up higher than the rest. Again, it worked for me.

Poor instructions - photos are incorrect and they tell you to re-use the brass collet. Unfortunately if you do this, you won't be able to use the new dial. I ended up re-using the existing potentiometer knob as it was a more solid setup than the plastic knob that comes in the kit. Also, the instructions don't clearly point out how to setup the 6 POS switch if you are using the more recent ERSKY9X firmware. Other than that though, it's a worthy add-on that provides very good functionality to help you get the most out of your 9XR/9XR Pro investment.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Poor instructions - photos are incorrect and they tell you to re-use the brass collet. Unfortunately if you do this, you won't be able to use the new dial. I ended up re-using the existing potentiometer knob as it was a more solid setup than the plastic knob that comes in the kit. Also, the instructions don't clearly point out how to setup the 6 POS switch if you are using the more recent ERSKY9X firmware. Other than that though, it's a worthy add-on that provides very good functionality to help you get the most out of your 9XR/9XR Pro investment.

Customer files
Pic info of HK 6 Position Switch Download [1476]
Pic info of HK 6 Position Switch_c Download [431]
6 POS Rotary Switch FIX for Turnigy 9X Download [379]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking