For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M in a basic package offering a very competitive price. The innovative All-in-One design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
The *optional plug and play GPS module (sold separately) will greatly enhance the performance for aerial photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
The advanced attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability. It is more flexible and stable, and gives the hobbyists a wonderful flight experience.
• All-in-One Design
• *Optional GPS Module Available/Accurate Position Hold
• Low Voltage Protection
• 6 Supported Multi-rotor Types
• Advanced Attitude Stabilize Algorithm
• Intelligent Orientation Control (IOC)
• Motor Arm and Motor Dis-arm
• Built-in Gimbal Stabilization Function
• Multiple Flight Control Mode/Intelligent Switching
• Failsafe Mode
• Support Futaba S-Bus and PPM Receiver
• Remote Adjustment
Naza-M Lite Main Controller
DJI V-SEN LED Module
USB Data Cable
All necessary mounting hardware/connection leads
Supported Multi-Rotor: Quad-rotor I4, X4, Hex-rotor I6, X6, IY6, Y6
Supported ESC output: 400Hz refresh frequency
Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels
Working Voltage Range: MC: 4.8V~5.5V, VU Input: 7.4V~26.0V (recommended 2S~6S Lipoly)
Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V)
Operating Temperature: -10°C ~ 50°C
Assistant Software System Requirement: Windows XP sp3/Windows 7/Windows 8
Dimensions: MC: 45.5x31.5x18.5mm, VU: 32.2x21.1x7.7mm
Weight: MC: 25g, VU: 20g
Hovering Accuracy *(GPS Mode): Vertical: +/-0.8m, Horizontal: +/-2.5m
Max Yaw Angular Velocity: 200°/s
Max Tilt Angle: 45°
*Note: GPS Module not included with this version. Can be purchased separately as an add-on module.
- Blade Count:
. Can take ppm so you only need one servo lead from the rx . Has a barometer so your altitude is stabilized too. very easy to program. feels 10 tomes better flying than the old kk broads
Good price, works great even in a 250 sized mini quad. Excellent stability functions even without GPS.
I really like open products and firmware, but i have to be honest, after 2 years of playing with open products - i learned a lot !!!!!!!
BUT ... if you really don't want to do some settings before every fly ... build a second multirotor and put a NAZA in it ! There are several advantages : 1 you will not be bored with open products ... if the goal of the day is making videos when you decide to do it ... a multirotor with NAZA is THE PERFECT TOOL ! 2 when you own a multicopter that flies great, and do the job, you will need and want to continue learning with open products ;-)) that's my opinion, and i think several people experienced with multirotors share that view.
NAZA is perhaps less FUN ... but is impressive when you need to stabilize, secure your fly and flying video equipements ... don't want to every time ask myself "WHY DID IT CRASH NOW WITH MY GOPRO INSTALLED" ?
That's the true ... GREAT PRODUCT, i can't do without now i know it !!!
And keed open product for the fun, because ... a lot of fun !!!
was vary happy to see that it came with a pmu and led
Great Flight Controller, it works perfectly, 2 axis gimbal support is great option. It works perfectly with GPS. I recomend it
Its fantastic controller from DJI. Very fast to set up the get ready.
Hands down the best flying easiest flight controller to program, DJI programming is straight forward and very easy to learn. There are other cheaper controllers, but you get what you pay for, glitchy hard to program controllers. Trust me I tried them all, but always choose DJI over any of them. What more can I say, its a "NAZA" #1 for a reason!!!
dji dedigimizde zaten baska sze gerek yok
Got use to the setup,this fc and the Naze 32 are the best hands down,these are rock solid locked in when you trim it out, gps I don't use gps anymore because I lost a very costly rig due to radio failure,this is the way to go if you don't use gps!
This is a nice flight control unit,the main thing is to get your radio set correctly to take advantage of all the options this FC has. Just remember all multirotors are not the same so the default settings may not work so you have got to tweak some of the P.I.D settings,Youtube has some nice instructional videos that will help,I have the KK2.1 boards also and my opinion says this is a much better flight control board,with the GPS option also.I would try lower gain setting to start with and then bump them up a little at a time and it with make this thing fly smooth as butter,Im no expert but I know if I can get these things to fly as good as mine does anyone can.it also is nicely packaged a real quality product!