Introducing our Doctor Mad Thrust High performance EDF motor series. Our Doctor has been busily working away behind the scenes to come up with this MAD series of EDF motors.......Power? - Not lacking with these!
This is 1200kv 6-8s version to suit 90mm EDF units, with a whopping 3700watt power output this 40mm inrunner is not to be sniffed at!
The Dr Mad Thrust range of EDF inrunners have been built with only one thing in mind - maximum EDF performance! They feature high temperature stator windings, high quality bearings, are precision balanced for smooth running and are of a 4 pole design.
Over-engineered to handle the stress and strain of high performance EDF units and high 'C' rated packs. The Doctor has been hard at work to bring you a series of bullet proof, extreme performance EDF motors that are built to last.
Get a Doctor Mad Thrust power house for your EDF!
Max current: 110A
Max Power: 3700 watts
Suggested Rpm Operating Range.
High Blade Count: 33000rpm
Low Blade Count: 38000rpm
Front Mounting Hole Distance: 25mm
Shaft Diameter: 5mm
Shaft Length: 12mm
Front mount Thread Size: M3
Plug type: Bullet-Connector 4mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Yeah.. The doctor has been working very hard until he forgot all about Quality Assurance! Located at those set screws, on the other end, inner side of the motor can, you can see bad metal burrs protruding, left-overs from drilling and threading. Some are touching wires. Over time, these pieces will come off and will get into the spinning mechanism. That's where you will have serious problems! I have the same problem with PRODUCT ID: 107000118salve, qualcuno sa se questo motore puo' montare elica propulsiva? e di che misura?? lo devo montare su f104 da 300cm, graziei bought this motor for my composite bae hawk and Alloy DPS Series 90mm 12-Blade on 8s (turnigy nanotech 4500mah 35c)
Pulled 3100watt at 99 A.... quite impressive, i am really happy with this setup!If our planning on using these motors in a boat using a water jacket? find a water jacket that fits a 40mm motor! My Leopard water jackets are to small in diameter. so they may be hard to find! The tp power water jackets are ordered and I hope they fit. The motors are heavy in weight and with good reason they have a lot of windings and looks to be well made. just wish they were pushing my 42'' Kevlar Zonda!Toller Motor. Super Laufverhalten.berzeugende Leistung
Eingebaut im 90mm DPS 12-Blatt von HK. Bei 8S und 96A