Introducing our Doctor Mad Thrust High performance EDF motor series. Our Doctor has been busily working away behind the scenes to come up with this MAD series of EDF motors.......Power? - Not lacking with these!
This is 3000kv 2-4s version to suit 70mm EDF units, with a whopping 1300watt power output this 29mm inrunner is not to be sniffed at!
The Dr Mad Thrust range of EDF inrunners have been built with only one thing in mind - maximum EDF performance! They feature high temperature stator windings, high quality bearings, are precision balanced for smooth running and are of a 4 pole design.
Over-engineered to handle the stress and strain of high performance EDF units and high 'C' rated packs. The Doctor has been hard at work to bring you a series of bullet proof, extreme performance EDF motors that are built to last.
Get a Doctor Mad Thrust power house for your EDF!
Max current: 85A
Max Power: 1300 watts
Suggested Rpm Operating Range.
High Blade Count: 41000rpm
Low Blade Count: 46000rpm
Front Mounting Hole Distance: 19mm
Shaft Diameter: 4mm
Shaft Length: 10mm
Front mount Thread Size: M3
Plug type: Bullet-Connector 3.5mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
I have put the Dr Mad Thrust 2950 3000kv in my Aquacraft Supervee 27 using S3 Lipo and 50mm 3 blade aluminium prop. And WOW the boat is almost flying in stead of floating in the water. It's a High Speed Supervee Monster now. Without any extra cooling for the motor. It stayed nicely cool.Looks beefy. long motor and a bit larger than a 28mm more like 30mm can so make sure you have a motor mount that will fitGood motor. Can handle a lot of power. Pushed to 120amps in edf on 4s. Bearings are NMB and remained smooth for quite a while compared to the super cheap stuff allthough this one is quite cheap also. Still works after 50-100 flights but the sound is not that great anymore. A bit on the heavy side.A power beast! I am going to use it on my Radjet 800 for extreme speed setup :-)If u want more speed on your funjet ultra! Buy it!parece ir bien pero lo tengo que comprobar con una helice mas grandeRan the motor up today on my eflite tester and the results were 759watts at 49amps with TURNIGY Nanotech 2200mah 4s packs with std 45amp VAMPIRE ESC and FANFitted up to my HK Durafly VAMPIRE... bolted straight in no mods!!! Test flight tomorrow.as with everything HK sells, the measurements are incorrect. The shaft is 4mm. NOT 3.175. Chinese cant seem to measure worth a dang.Vamos a probar que tal resultado da con una wemotec minifan evo de 70 mm