New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Durafly™ Auto-G and Auto-G2 Complete Auto-Start System

Durafly™ Auto-G and Auto-G2 Complete Auto-Start System

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$18.83
Status:
In Stock
SKU:
310000116
WANT FREE SHIPPING? Click here to find out more!

This is the complete Auto-Start system for the Durafly Auto-G and Auto-G2 gyrocopter. This is a direct replacement for the Auto-G2 but can also be used as an upgrade kit for the original Auto-G. All required parts are included - Auto-Starter w/motor, flex shaft, rotor base assembly and electronic motor driver.

This system spins the main rotor to assist with take-offs. It makes for much easier ROG take-offs and hand launches. It can be easily operated by a spare channel on your transmitter. It simply uses an on/off signal, making your GEAR or AUX (switch) channels perfect for use with this system.

This system can be easily fitted to the original Auto-G with very little modification. You will simply need to cut away a small part of foam from the upper servo access panel and drill two small holes in the wooden supports. It's that simple!

Specs:
Operating Voltage: 3S lipoly battery
Battery Connection Type: 3S balance plug (JST-XH)
Receiver Connection Type: JR style plug
Weight: 80g

  • SKU 310000116
  • Brand Durafly
  • Shipping Weight 135.0000
  • Length 230.00
  • Width 40.00
  • Height 50.00
  • IC/2:Elec -
  • Motorsize(diam-or-cc) -
  • Wingspan(mm) 812.00
  • Length(mm) -
  • SaleWeight(g) -
  • Capacity (mAh) -
  • Durafly Auto G 2 AUTO START System Kit
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Sugiero que se le agregue un conector adicional para conectar la alarma de bajo voltaje. Acabo de quemar el mio por falta de este accesorio, intentando conectarla termin haciendo una conexin invertida y quem el mando electrnico

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sugiero que se le agregue un conector adicional para conectar la alarma de bajo voltaje. Acabo de quemar el mio por falta de este accesorio, intentando conectarla termin haciendo una conexin invertida y quem el mando electrnico

Yesterday I tested my original Auto-g with this motor installed for the first time. Result : it crashed. It seems that the rotor spins much slower than without this motor. The reason for this being that the one-way ball bearing is installed in the gearbox. Because of this, the flexible drive shaft rotates with the rotor and slows it down, especially when turning. My Auto-G was flying straith forward, than suddenly rolled right and entered a spin. To recover an autogyro from a spin when flying only 15 - 20m high is impossible, so it crashed nose first, unrepairable, sadly enough.
So if you're flying an Auto-g (first version) I wouldn't recommend this motor !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Yesterday I tested my original Auto-g with this motor installed for the first time. Result : it crashed. It seems that the rotor spins much slower than without this motor. The reason for this being that the one-way ball bearing is installed in the gearbox. Because of this, the flexible drive shaft rotates with the rotor and slows it down, especially when turning. My Auto-G was flying straith forward, than suddenly rolled right and entered a spin. To recover an autogyro from a spin when flying only 15 - 20m high is impossible, so it crashed nose first, unrepairable, sadly enough.
So if you're flying an Auto-g (first version) I wouldn't recommend this motor !

Impossible to take off the Auto-G without this ! Buy it :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Impossible to take off the Auto-G without this ! Buy it :)

Works great, but its kind a hard to get it in de holes.....I heard something cracking...:(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great, but its kind a hard to get it in de holes.....I heard something cracking...:(

The ESC on this little motor is crap. Fellow pilot at my field has been thru 2 and I never even got to fly mine before it went dead. And no Hobby King the wires were connected properly. Be aware and ready to replace.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The ESC on this little motor is crap. Fellow pilot at my field has been thru 2 and I never even got to fly mine before it went dead. And no Hobby King the wires were connected properly. Be aware and ready to replace.

got this to replace the one in the model as after a couple of crashes it started turning slow i will see if i can repair for a spare

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got this to replace the one in the model as after a couple of crashes it started turning slow i will see if i can repair for a spare

nice parts for self built project

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice parts for self built project

Installed really easily. Watch the video from HK and its really simple to follow. Only gripe was my motor was wired backwards. A resoldered the wires and now works perfectly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed really easily. Watch the video from HK and its really simple to follow. Only gripe was my motor was wired backwards. A resoldered the wires and now works perfectly.

Very happy with product...note I found generates heaps of Torque if you switch it on during spot landing...just use it during take off, turn it off moments before lift off...over all great for not having to flick your wrist start it and on much shorter ground...was easy to install on my V1 G

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very happy with product...note I found generates heaps of Torque if you switch it on during spot landing...just use it during take off, turn it off moments before lift off...over all great for not having to flick your wrist start it and on much shorter ground...was easy to install on my V1 G

This auto start idea is great, it has decent quality, great value. Unfortunately, the electronic switch is the weak link. Mine gave up after a dozen so flights. So I took it appart and found that the motor is actually a nice DC carbon brushed motor with a nice approx. 16:1 gear box and one way bearing. The electronic switch went dead. I replaced mine with a soft start DC Motor 20A ESC. The stock auto start connector feeds off the flight lipol 11.1 volts and the auto start switch does some DC to DC soft start conversion to activate the rotor slowly to full output voltage. I have a feeling that auto start switch mosfet went out more trouble to troubleshoot when you can simply replace it with a regular soft start speed control. I actaully purchased a second unit so that I can use just the mechanics in case they go bad at a later time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This auto start idea is great, it has decent quality, great value. Unfortunately, the electronic switch is the weak link. Mine gave up after a dozen so flights. So I took it appart and found that the motor is actually a nice DC carbon brushed motor with a nice approx. 16:1 gear box and one way bearing. The electronic switch went dead. I replaced mine with a soft start DC Motor 20A ESC. The stock auto start connector feeds off the flight lipol 11.1 volts and the auto start switch does some DC to DC soft start conversion to activate the rotor slowly to full output voltage. I have a feeling that auto start switch mosfet went out more trouble to troubleshoot when you can simply replace it with a regular soft start speed control. I actaully purchased a second unit so that I can use just the mechanics in case they go bad at a later time.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags