Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register

DYS 250 Glass Fiber Folding Drone w/Storage Case (PNF)

DYS 250 Glass Fiber Folding Drone w/Storage Case (PNF)

Now save save $76.32 $76.32

Special Price $83.67 $83.67

You save save $76.32 $76.32

Was  $159.99

Out of stock!
Rating:
Stock:
OUT OF STOCK
Weight:
1176 g
SKU:
9206000032-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Do you tire at the thought of building your next 250 drone? Do you wish for a PNF 250 size frame with all of the functionality of a DIY drone and more? The DYS 250 PNF drone will answer a big YES to all of those questions!

The DYS 250 PNF quadcopter has all of the functionality and flexibility of a DIY frame and the ease of use of a PNF. The latest DYS offering incorporates quality BE series brushless motors, fully licensed open pilot CC3D flight control board (pre-tuned), BLheli speed controllers and a folding frame design which neatly folds into the supplied storage case.  

The CC3D Flight controller provides a crisp feel when flying tricopters, quads, hexcopters, octocopters, and even fixed wing planes and has been specifically selected for this PNF quadcopter to bring you a super stable quadcopter straight out of the box.

The ground control software (GCS) provides an easy way to program the board via a USB connection. Each board has been pre-flashed and tuned with the latest firmware so setting up your quadcopter will take no time at all.  

The DYS 250 PNF is supplied complete with a full set of carbon fiber props, prop adapters and all fixtures and fittings.      

Features:
• PNF format add your receiver and let the fun begin
• 20A Opto BLHeli Speed controllers
• Powerful DYS BE series 2300kv motors
• Pre-tuned CC3D flight control system
• Open pilot cloud configured and pre-tuned
• Folding portable frame
• Handy carrying case included
• Extremely durable glass fiber construction
• full parts support

Specs:
Wheel Base: 250mm
Motors: DYS BE1806 2300kv (pre-installed)
ESC: 20A opto BLHeli (pre-installed)
Props: 5x3 carbon (pre-installed)
Flight Controller: CC3D (pre-installed)
Weight: 305g

Required:
5~6ch control radio
1300~2200 3s battery
FPV gear optional

Product
Specifications

Additional Information

  • SKU:
    9206000032-0
  • Brand:
    No
  • Weight(g)
    1176.00
  • Length
    340.00
  • Width:
    85.00
  • Height:
    190.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
aside from the landing gear making the case too small, it only comes with CW threads, so expect it to lose props mid flight unless you tighten it to the max and then some before every flight. expect to spend another 10$ on CCW threads.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall

i connect it to open pilot and recalibrate after the Multirotor I went far to the left , there are the trims or anything that can not be , please help, sorry for muy english
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall a very good quad. All of the parts seem to be good quality. I've had it a few months and haven't had any problems with the electronics. Flies stable and pretty fast. Only negatives are that you have to leave the landing gear off if you want to keep it in the case (the aluminum thumb screws work well as landing gear though), and the ESCs are sort of built into the frame which would make replacing them a hassle. I use Gemfan props but the carbon fiber ones worked as well. Just for fun I loaded it up with an old heavy camera/transmitter system, heavy 3s 2200 mah battery, a heavy naza flight controller with GPS and all of the accessories I could think of. Even with all of the weight, it was still pretty agile (or at least as agile as a Naza quad can be).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Many reviewers all but write HK off for poor quality of their 250 miniquads but this one is really a superb piece of kit. It is sooo strong and rigid with well made parts. The HK support video is nicely done and once setup I fired it up and it was perfect right out of the box. Would have been nice to have some spare props with the kit though. Also the usb is just too close to the PDB to insert the USB cable as the speedies get in the way. 2mm higher standoffs would have fixed this. This is my first miniquad and I can't see me outgrowing it anytime soon. Well done HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What I like: Small form factor. It folds up nice and small. The price. The over-all performance is acceptable.



What I dont like: The thumb screws like to come lose. Some nylon locking nuts would have saved a lot of headache. The nylon standoffs are hideous. I replaced mine with Red Aluminum standoffs. They are 35 mm X 3mm if your curious. The ESC's are giving folks trouble. As soon as one of mine dies, Im taking them all out and replacing them with regular ESC's. The are soldered into the power distribution board and require a complete disassembly to get to carefully. Not only that but they rake up valuable room where you could be putting your FPV gear and receiver.



The OpenPilot software is pretty amazing. Its as easy to use as the video suggests. Its fast and intuitive. That being said I put cleanflight on mine and I have to say that she flies cleaner and feels more locked in. I may switch back to OpenPilot simply because of its ease of use. We shall see. The 5" props are great if you slap a 4s battery on here. Otherwise I suggest 6x3 HQ props. The stock carbon fiber props work fine on 3s, and they will zoom you down the field, but the 6" props fell more stable and they hover at 1/3 throttle. For FPV and recording I will stick with the 6" props. Stay away from gemfans. THey are cheap but man they are ugly and unbalanced. Spend a few pennies more on the HQ's and you will see the difference in quality on the bench and in the air.



For the money you cant go wrong w
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
over all its a great starter and easy to get up and going I hope part will be available soon, I had a hard landing in the lawn and lost one of the stands, they are hard to put on but they come off very easy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fun quad to fly. CC3D is not to hard to program, there are lots of blogs and videos,to help you

This is my first 250, so fare im happy with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
There's my video with this quad:
https://www.youtube.com/watch?v=xPZGXjVW9Rk

Flies great, very durable after pretty bad crashes.
Buy some decent props and secure the ESCs with hot glue because they are exposed and I lost a capacitor and now the motors are working pretty unstable until I buy a new capacitor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice Quad and I love the case, only trouble is I landed on wet grass and burnt out one ESC. Would be a good idea to cover the exposed PCB on the bottom for safety.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Okay so it came exactly as described. Almost ready to fly, just plug a receiver and a battery, connect it to Openpilot and set it up (takes 5-10 minutes), install the props and your'e ready. Flies pretty good, but I'll probably crash it and there's no spare parts or frame only for sale, thats a shame. Also the quad does not fit in the case with the landing gear.

This is a great 250 starter quad, clean build and very easy to start.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • DYS 250 Glass Fiber Folding Quadcopter With Storage Case

  • DYS 250 Glass Fiber Folding Drone w/Storage Case

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.