Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • USA

EDF Ducted Fan Unit 5 Blade 3.5inch

EDF Ducted Fan Unit 5 Blade 3.5inch

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
120 g
SKU:
OR003-00106-5B
Product
Description

EDF Ducted Fan Unit 3.5inch  5 Blade
Blade Diameter: 89mm / 3.5inch
Outer Case Diameter: 92mm
Wall Thickness: 1.9mm
EDF Length: 73mm/ 54mm without shroud
Front Shroud Diameter: 106mm
Blade Type: 5
Shaft Size: 3.175mm
Made from high strength reinforced plastic.
Spare propellers available.
The shroud on this is removable, so it can be placed inside an aircraft or kept on the wing or at the front and keep the shroud on.
Shown is the 6 blade model, listing is for 5 bladed model.
This fan will take up to a 29mm diameter motor.

Recomended Motor: 390 / 28-47 9 Turn (11.1~14.8v)
ESC: 50A
Rpm: 4,000kv
Power: 650~1000g Thrust


Product
Specifications

Additional Information

  • SKU:
    OR003-00106-5B
  • Brand:
    N/A
  • Weight(g)
    120.00
  • Length
    0.00
  • Width:
    0.00
  • Height:
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This fan is not very solid. I dont recomend it. The changesun is worth every cent. I suggest you buy that from Hobbyking instead of this one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have tried on HXT 2835 (380S) 3900kv Brushless Inrunner. It is just not made for this motor. Quiton M may like to clarify this please. Marco Ripa - Are you happy with HXT 2435 (370S) ? thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great fan for use with the KD KA450H 3200kv brushles Heli Motor. I have several jets GWS f-15 and Art Tech SU-27 with these on 3S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The price is low and very satisfactory.

Making can be improved, and it is pleasant.

I want you to increase the lineup of the motor more.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good fan for the price but had to balance it, expected though considering it was so cheap, put turnigy 2836 3700kv heli motor in it and it has great thrust
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice fit for an A-10
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
C parfait fonctionne toujours jusqu'a maintenant
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I cannot fly with this EDF coz it's to big for my F18. But it is a good material.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These 3.5" EDF's are built light - everybody spends time balancing them as the rotor is moulded off-centre about 1/4mm. Luckily blade clearance 1mm (inefficient) - Big FSA with little 28mm motor in centre.



I tested a 2835-3900Kva , 3s2200 for 52,2Ap 530Wp ! and 2835-2700Kva , 3S2200 for 27.5Ap 294Wp both with finned heat sinks - Generally this fan suits a large fuselage slower Jet like - HC Haoye J10 - slow VNE but good thrust & vertical 1:1
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fan is not bad but not great also. The rotor was very unbalanced so that needed a lot of work. The fan housing looks ok and strong.



I used a 2200kv 100g motor and 60A esc to test this fan on 4s Zippy H 5000 mAH. This resulted in 400W and about 800g thrust.



I needed a rotor for a 75mm fan and i cut and balanced this 89mm rotor. Works great! Down to 360W but only 650 g thrust.



Great fan but needs a lot of work to balance. I will buy 4 more
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.