New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

EDF Ducted Fan Unit 5Blade 2.5inch 64mm

EDF Ducted Fan Unit 5Blade 2.5inch 64mm

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
EDF64mm
WANT FREE SHIPPING? Click here to find out more!
EDF Ducted Fan Unit 5Blade 2.5inch 64mm
 
 
Blade Diameter: 64mm / 2.5inch
Blade Type: 5
Shaft Size: 3mm
Made from high strength reinforced plastic.
Spare propellers available.
Recomended Motor:This fan will take up to a 28mm diameter motor.(see related items)
 
  • SKU EDF64mm
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 39.0000
  • Packaging Length 0.00
  • Packaging Width 0.00
  • Packaging Height 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i suppose you get what you pay for. i was forced to go with this as others were out of stock. i was not aware it would be a push fit collett (i should have read the reviews) it soes press fit quite well. unfortunatley my unit arrived broken. the outer housing was cracked. for the price there is no point in sending it back. the fan does not line up straight and rubs on the inside. i have glued fixed and sanded mine to get it to work. i have given this 2 crowns overall rating and 1 crown quality due to the fact it is cheap.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i suppose you get what you pay for. i was forced to go with this as others were out of stock. i was not aware it would be a push fit collett (i should have read the reviews) it soes press fit quite well. unfortunatley my unit arrived broken. the outer housing was cracked. for the price there is no point in sending it back. the fan does not line up straight and rubs on the inside. i have glued fixed and sanded mine to get it to work. i have given this 2 crowns overall rating and 1 crown quality due to the fact it is cheap.

Pos sur PHAZER HK no probleme. Il faut balancer l'hlice pour un Bon resultat. Tourne avec un 2815 4800kv. Parfait

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pos sur PHAZER HK no probleme. Il faut balancer l'hlice pour un Bon resultat. Tourne avec un 2815 4800kv. Parfait

Der richtige Ersatz fr den F9F Panther Motor ... den Fan allein such' ich noch ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Der richtige Ersatz fr den F9F Panther Motor ... den Fan allein such' ich noch ...

Over all its a good product nothing wrong with materials used. But be warned the cyinder hub for the impella is"pressured" on instead of the common Hex grub screw. I was lucky I had a spare cyinder with a hex grub common fitting just sitting ard, overall it works great but...not always going have a spare cyinder sitting ard so I'd much prefer the normal one I not really dare to use the Pressure cyinder hub

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Over all its a good product nothing wrong with materials used. But be warned the cyinder hub for the impella is"pressured" on instead of the common Hex grub screw. I was lucky I had a spare cyinder with a hex grub common fitting just sitting ard, overall it works great but...not always going have a spare cyinder sitting ard so I'd much prefer the normal one I not really dare to use the Pressure cyinder hub

nice, good balance of prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice, good balance of prop

I have been very happy with these units. I have them in three different planes and all have worked great. Am using the Turnigy 2610 4500kv motors with 30amp esc's and 3s batteries from 1300 to 2200mah's.
I installed the adapters by hammering them on after placing the rear of the motors on a brick. I used no adhesives and none of the adapters have come loose. I will be ordering more of them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been very happy with these units. I have them in three different planes and all have worked great. Am using the Turnigy 2610 4500kv motors with 30amp esc's and 3s batteries from 1300 to 2200mah's.
I installed the adapters by hammering them on after placing the rear of the motors on a brick. I used no adhesives and none of the adapters have come loose. I will be ordering more of them.

I prefer the HK64mm EDF unit.For this EDF unit, the aluminum piece needs to be pressed onto a 3mm motor shaft. Thread lock must be used to give a secure fit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I prefer the HK64mm EDF unit.For this EDF unit, the aluminum piece needs to be pressed onto a 3mm motor shaft. Thread lock must be used to give a secure fit.

we'll use it on a foam plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

we'll use it on a foam plane

EDF Ducted Fan Unit 5Blade 2.5inch 64mm

e un'ottima ventola gira con una spinta da paura

accopiata con il motore

Turnigy 2815 EDF Outrunner 4800kv

ve lo consiglio

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

EDF Ducted Fan Unit 5Blade 2.5inch 64mm

e un'ottima ventola gira con una spinta da paura

accopiata con il motore

Turnigy 2815 EDF Outrunner 4800kv

ve lo consiglio

need to balance propellor

statement :Spare propellers available.

But they are not available!!!!!

When will they be available??

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

need to balance propellor

statement :Spare propellers available.

But they are not available!!!!!

When will they be available??

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking