Take to the skies with this powerful mini drone. The BabyHawk features a Femto F3 Flight Controller with built-in 5v regulator for easy use. Perfect for indoor flying, the micro drone weights under 70g with a wheel base measuring only 87mm.
Use the FPV camera to completely immerse yourself in the flight experience. The camera mount has a 23 degree tilt, which allows the CMOS 800TVL camera to remain level as you rip through the skies. The real-time video technology limits latency to ensure visuals are relayed quickly to your chosen headset or base station monitor.
Fitted with brushless 1104-5250KV motors, the BabyHawk quadcopter is lighter, faster and quieter. React to your environment by adjusting the motor's thrust, navigating obstacles and the elements with ease.
Survive crash landings with the full housing shell and prop guard, protecting the camera and motors from obstacles and preventing damage. If you wish to tweak your drone's capabilities, download Betaflight to customise your flight experience. The BabyHawk includes four spare tri-blade propellers and an assortment of screws to help keep your drone flying high.
• Small 87mm wheelbase, 69.3g weight
• All-in-One Camera and VTX 25MW CMOS Camera
• Femto F3 Flight Controller / PDB board with built in 5v regulator
• Bullet 6A BLHeli 2S Plug-In ESCs
• 1104-5250KV Brushless Motor
• 23 degrees of tilt for camera
Drone Size (without antenna and camera): 132x132x48mm
Camera: CMOS 800TVL
Video Transmitter: 5.8GHz 25-200mW, 40 Channel
Flight Controller: F3 Femto
Motor: 1104-5250KV Brushless
ESC: Bullet 6A (BLHeli-S)
Propeller: 2345 tri-blade
Weight: 68.5g (w/o battery)
1 x 2S 300mAh LiPo battery
4CH or higher Transmitter and Receiver
FPV Goggles or base station (optional)
My first fpv quad. It took me while ( a week), to figure out how to how to bind to a spectrum dx 6, and configure betaflight. It's almost like learning a new language!!!
1- dsm/dsmx spectrum/orange satellite rx. I got the R110XL. This means soldering the 3.3volt power supply from another point on the board, rather than from provided pins. Not 100% sure, but I believe you can tap directly into the pins if you have a frsky/ Taranis radio.
2- spare batteries. I got the turnigy bolt 2s 500mAh.
3- download betaflight on laptop and update all reqd drivers. ( suggest you google and watch YouTube vids, some v. good info out there. Once you update betaflight, you can plug in babyhawk. Without updates, betaflight won't recognise babyhawk.
4- set up and enjoy your flights. Don't forget a spotter, it's easy to lose!!!Fantastic little quad, great for buzzing around the back yard or at the local park , Love it !