New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

F-27 Friendship Fiber Glass Kit

F-27 Friendship Fiber Glass Kit

Discontinued Product

Please continue searching for a similar product.
SKU:
F-27Kit
WANT FREE SHIPPING? Click here to find out more!

Designed as the successor of the Douglas DC-3 the Fokker F-27 Friendship was a 28 seat passenger plane engineered and commissioned in the late 1950's. The F-27 served many years successfully as a passenger craft but would later take on a successful role as an air cargo ship. With a payload of 6 tonnes the Fokker F-27 is still in service today and is a popular choice for express cargo shipments.

Featuring a full fiber glass fuselage with built up ply and balsa construction this model is sure to attract attention. Two 28 size 1600kv brushless out runners will be required for (one for each wing) along with a 30Amp ESC for each motor. Five 9g servos will be required as the model features a twin servo elevator setup with a shared servo for rudder and the steerable nose wheel.  All the general hard ware (Push rods, screws, landing gear etc) is included to get this kit underway. You will also require your own transmitter and receiver (Tx/Rx).

This is not a beginners model and some modeling experience will be required to complete this kit. However the finished product will be of a high quality and will last a life time.


Spec.
Wing Span : 1200mm
Length : 1000mm
Wing Area: 18dm2
Model Weight: 1400g
Servo: 5 x 9g (Not included)
Motor: 2 x 26~28 series Brushless outrunner 1600Kv or higher (Not included)
ESC: 2 x 30A (Not included)

Required.
Your own TX & RX
5 x 9g
2 x 26~28 Brushless Motor
2 x 30A ESC
Battery: 11.1v 2200mah 3S1P (or greater)

  • SKU F-27Kit
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 2481.0000
  • Packaging Length 1030.00
  • Packaging Width 160.00
  • Packaging Height 370.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Todos estao falando muito bem da qualidade do produto. Realmente o fabricante construiu o modelo muito bem detalhado e bonito de ver. Acontece que estamos falando de aeromodelo e tambem devemos discutir o comportamento do aviao em voo, o que nos meus 4 anos como aeromodelista deixou muito a desejar, mesmo com varios ajustes. Testei diversos motores como 2822, 2836 entre outros, helices 7x4, 7x5, 8x4 bi e tri-pah (sempre uma contra rotacao por se tratar de um bimotor), alterei o CG de 4,8mm ate 6,8mm da borda da raiz da asa determinando a corda mdia aerodinmica, utilizei ESC de 30 e 35, alem de usar baterias de 1.7 a 2300mAh. Resultado: Infelismente o meu modelo esta como enfeite por em voo o modelo tem uma pessima performance necessitando trimagem constante. Nao recomendo para iniciantes, soh para experientes aventureiros.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Todos estao falando muito bem da qualidade do produto. Realmente o fabricante construiu o modelo muito bem detalhado e bonito de ver. Acontece que estamos falando de aeromodelo e tambem devemos discutir o comportamento do aviao em voo, o que nos meus 4 anos como aeromodelista deixou muito a desejar, mesmo com varios ajustes. Testei diversos motores como 2822, 2836 entre outros, helices 7x4, 7x5, 8x4 bi e tri-pah (sempre uma contra rotacao por se tratar de um bimotor), alterei o CG de 4,8mm ate 6,8mm da borda da raiz da asa determinando a corda mdia aerodinmica, utilizei ESC de 30 e 35, alem de usar baterias de 1.7 a 2300mAh. Resultado: Infelismente o meu modelo esta como enfeite por em voo o modelo tem uma pessima performance necessitando trimagem constante. Nao recomendo para iniciantes, soh para experientes aventureiros.

Hi I bought this beautiful kit however in the files tab here is one page missing from the manual step 9 and 10 are missing does anybody has a copy of the manual?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi I bought this beautiful kit however in the files tab here is one page missing from the manual step 9 and 10 are missing does anybody has a copy of the manual?

Keine Bauanleitung zu bekommen, berhaupt keine Daten zum Flieger zu bekommen

Wirklich nur fr Profis zu empfehlen

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Keine Bauanleitung zu bekommen, berhaupt keine Daten zum Flieger zu bekommen

Wirklich nur fr Profis zu empfehlen

Flew mine this week. 2x D2826-1650 (no longer available), 25A ESC, Master airscrew 7x4 3-blade props, 3S 2650 Batt. It took right off from a grass field, but top speed was a bit lacking. You need to keep your speed up as the wing loading is high and it stalls easily. Switched to APC 7x6 two blade props and it flew much better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flew mine this week. 2x D2826-1650 (no longer available), 25A ESC, Master airscrew 7x4 3-blade props, 3S 2650 Batt. It took right off from a grass field, but top speed was a bit lacking. You need to keep your speed up as the wing loading is high and it stalls easily. Switched to APC 7x6 two blade props and it flew much better.

CG is 27 mm or 2 1/4 inches

Setup is (2) Turnigy 2826-10 1400 KV motors

(2) 7 x 5 thin electric props

(5) Turnigy 9 gram micro servos

(2) Turnigy Plush 30 Amp ESC's

(1) Zippy 3S 2200 Mah 25 C battery

288 watts @ WOT off 11.1 V, 26 Amps

4 1/2 minute flights

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

CG is 27 mm or 2 1/4 inches

Setup is (2) Turnigy 2826-10 1400 KV motors

(2) 7 x 5 thin electric props

(5) Turnigy 9 gram micro servos

(2) Turnigy Plush 30 Amp ESC's

(1) Zippy 3S 2200 Mah 25 C battery

288 watts @ WOT off 11.1 V, 26 Amps

4 1/2 minute flights

Is there any recommendation for outrunner that is available in HK. Can somebody write it down? Thanks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Is there any recommendation for outrunner that is available in HK. Can somebody write it down? Thanks

I received my kit yesterday. It is a beautifully finished fiberglass kit. It is defentaly designed for an experieced modiler. There is much cutting and fitting involved. It does not come with instructions. I tried to obtain a set of instructions from Hobby King because the discussion comments leads me to believe that others had instructions supplied. The answer from Hobby King customer service was that there were no instructions available from the supplier. I am hoping that one of the individuals that have a copy of instructions will share them with me. I understand that they are in Chinese. If I can get a copy I will translate them to English and then publish a set in the file section for all of us to use. Because there is so much cutting and fitting involved it is going to be very hard to finish this model using the trial and error process. You make a mistake in cutting a slot in the wrong place and you have runed the project. If there were instructions or if I can obtain instructions this kit would rate five crowns

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received my kit yesterday. It is a beautifully finished fiberglass kit. It is defentaly designed for an experieced modiler. There is much cutting and fitting involved. It does not come with instructions. I tried to obtain a set of instructions from Hobby King because the discussion comments leads me to believe that others had instructions supplied. The answer from Hobby King customer service was that there were no instructions available from the supplier. I am hoping that one of the individuals that have a copy of instructions will share them with me. I understand that they are in Chinese. If I can get a copy I will translate them to English and then publish a set in the file section for all of us to use. Because there is so much cutting and fitting involved it is going to be very hard to finish this model using the trial and error process. You make a mistake in cutting a slot in the wrong place and you have runed the project. If there were instructions or if I can obtain instructions this kit would rate five crowns

resebi meu f-27 fiquei encantado mas o que me preocupa nao vim o manual como vou montar .alguem pode mi ajudar. agradeo se alguem puder me ajudar

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

resebi meu f-27 fiquei encantado mas o que me preocupa nao vim o manual como vou montar .alguem pode mi ajudar. agradeo se alguem puder me ajudar

After many months to get the courage to fly the F27, the first flight was rather hair rasing to say the least. Take-off was fine, climb out was fine, then all hell brokeout, From what I could determine the F27 became asymmetrical and I lost it for a number of times until it plunged into long grass. Superficial damage was sustained and easily repaired. While preparing for the next flight I noticed that there was a difference of 2000rpm between the two motors through most of the rev range. The offending component was the ESC on one motor. With this rectified ( new ESC ) and tested, the next flight was delightful although this plane travels quite fast and is very sensitive to control input. My final submition is this is a delightful aeroplane, but be careful with your setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After many months to get the courage to fly the F27, the first flight was rather hair rasing to say the least. Take-off was fine, climb out was fine, then all hell brokeout, From what I could determine the F27 became asymmetrical and I lost it for a number of times until it plunged into long grass. Superficial damage was sustained and easily repaired. While preparing for the next flight I noticed that there was a difference of 2000rpm between the two motors through most of the rev range. The offending component was the ESC on one motor. With this rectified ( new ESC ) and tested, the next flight was delightful although this plane travels quite fast and is very sensitive to control input. My final submition is this is a delightful aeroplane, but be careful with your setup.

Instructions are not in English so hopefully there are enough photos to be able to visually assemble the kit. Overall construction looks excellent. Fuselage is very well constructed. Just wish there were some suggestions for the motor size. None are listed. Anyone have any ideas.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Instructions are not in English so hopefully there are enough photos to be able to visually assemble the kit. Overall construction looks excellent. Fuselage is very well constructed. Just wish there were some suggestions for the motor size. None are listed. Anyone have any ideas.

  1. 1
  2. 2
Customer files
F-27kit manual8 Download [552]
F-27kit manual2 Download [557]
F-27kit manual3 Download [559]
F-27kit manual4 Download [519]
F-27kit manual5 Download [575]
F-27kit manual6 Download [563]
F-27kit manual7 Download [483]
F-27kit manual1 Download [640]
manual Download [640]
manual Download [557]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking